manualshive.com logo in svg

Panasonic LB-DH8 series, Operator'S Manual

Share
Download
Panasonic LB-DH8 series Operator'S Manual Download Page 76

76

Operations

Web interface operation

Drive <Monitor>

Indicates information concerning the drive system of the unit.

Status

Indicates the state of the drive system of the unit.

Ready: Normal.
Not Ready: Starting up or performing a self-diagnosis.
Not Usable: Not available due to trouble.

Additional Information

Indicates additional information of “Status” (only when “Status” is set to “Ready”).

No Disc: Discs are not in.
DiscIn: Discs are in.
DiscIn W Protect: Discs are in, but they are write-protected.
DiscIn R/W NG: Discs are in, but a write/read error has occurred.

Medium Removal

Indicates the permission status for ejecting media from the drive system (only 
when “Status” is set to “Ready”).

prevented by host: The application prohibits the ejection of the disc from the 
drive.

≥

The disc can be ejected if this shows blank.

Power On Time

Indicates the time of power supply to the drive system.

Temperature

Indicates an internal temperature of the drive system.

Encrypt Mode

Indicates the enable/disable setting on writing data encryption.

≥

When there are no discs or if there is an unformatted disc inserted, “---” is 
displayed.

≥

For details, refer to “Encryption of write content” (

102).

Verify Mode

The verify mode setting status for writing is displayed.

Auto Verify: Automatically determines the records to be verified and then verifies 
them.
All Verify: Verifies all records.

≥

For details, refer to “Verify mode” (

102).

RAID Level

Indicates the RAID level setting. (

103)

RAID 0: RAID 0 is set.
RAID 5: RAID 5 is set.
RAID 6: RAID 6 is set.

≥

For details, refer to “RAID functions” (

103).

Summary of Contents for LB-DH8 series





















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands