81
Operations
Web interface operation
Interface <Monitor>
Indicates the settings of the interface port of each module.
“SAS”
“iSCSI”
≥
To change the setting, make the selection in the following order:
“Configure”
“iSCSI Interface” (
Speed
Indicates the connection speed settings.
≥
The unit is [bps].
SAS Address
Indicates the WWID (World Wide Identifier).
Port
Indicates an iSCSI port.
iqn
Indicates the node name.
CHAP
Indicates information concerning the CHAP authentication.
Target Name
Indicates the target name.
The target name is indicated only when “CHAP” has been set to “Target” or “
Initiator”.
Initiator Name
Indicates the initiator name.
The initiator name is indicated only when “CHAP” has been set to “ Initiator”.