Panasonic LB-DH8 series Operator'S Manual Download Page 52

Page: 52 / 148

Operations

Operating the control panel

Error Info <Monitor>

Indicates the history of the last five errors or warnings that occurred in the unit from the most recent.

Serial Number <Monitor>

Indicates the serial number of each module.

No.

Displayed error number/Total number of errors

Date

Date and time when error or warning occurred
Shown as (YYYY/MM/DD HH: MM: SS)

Module

Module number where error or warning occurred. If the
module number cannot be identified, nothing is displayed.

Code

Indicates error or warning code.

Device

Indicates the device where error or warning occurred.

No.

Indicates the device number where error or warning
occurred. The number is displayed when an error or
warning occurred on more than one device, such as drive
system and fan.

Summary of Contents for LB-DH8 series





















































































































































Search results

Summary of Contents for LB-DH8 series

Reviews:

Related manuals for LB-DH8 series

Brands by name

Popular brands

Panasonic LB-DH8 series, Operator'S Manual

Search results

Summary of Contents for LB-DH8 series

Reviews:

Related manuals for LB-DH8 series

Brands by name

Popular brands