Panasonic LB-DH8 series Operator'S Manual Download Page 66

Page: 66 / 148

Operations

Operating the control panel

Contrast <Config>

Sets a contrast on the control panel.

≥

Selects a desired level from eight levels 1 to 8. The higher the level is, the brighter the control panel will be.

≥

The initial setting is “4”.

≥

It is recommended that a level brighter than is sufficient not be set. Doing so will affect the useful life of the
LCD panel.

≥

Selecting “Set” will execute the operation.

Backlight Auto Off <Config>

Sets the auto off time of the backlight on the control panel.

Off: Backlight is on all the time.
1min/3min/5min/10min/30min/60min: Sets the auto off time.

≥

The initial setting is “5min”.

≥

It is recommended that a value longer than is sufficient not be set. Doing so will affect the useful life of the
LCD panel.

≥

Selecting “Set” will execute the operation.

Support Contact <Config>

Sets your support service provider contact information.

≥

Selecting “Save” will execute the operation.

Support Name

Sets your support service provider name.

≥

A maximum of 64 characters can be input.

Support Phone

Sets the phone number of your support service provider.

≥

A maximum of 32 characters can be input.

Support Email

Sets an email address of your support service provider.

≥

A maximum of 255 characters can be input.

Summary of Contents for LB-DH8 series





















































































































































Search results

Summary of Contents for LB-DH8 series

Reviews:

Related manuals for LB-DH8 series

Brands by name

Popular brands

Panasonic LB-DH8 series, Operator'S Manual

Search results

Summary of Contents for LB-DH8 series

Reviews:

Related manuals for LB-DH8 series

Brands by name

Popular brands