Panasonic LB-DH8 series Operator'S Manual Download Page 37

Page: 37 / 148

Operations

Operating the control panel

This menu allows you to check the operating states of the unit.

Status menu

System Status

Indicates both the status of the changer and the drive.

Ready: Both status indications are normal.
Not Ready: Starting up or performing a self-diagnosis.
Not Usable: The system cannot be used because there is an anomaly with

either or both the Changer and the Drive

Changer Status

Indicates changer status.

Ready: Normal.
Not Ready: Starting up or performing a self-diagnosis.
Not Usable: Not available due to trouble.

Drive Status

Indicates drive status.

Ready: Normal.
Not Ready: Starting up or performing a self-diagnosis.
Not Usable: Not available due to trouble.

Date

Indicates the date.

Last Error

Indicates the error code that occurred most recently.

Last Warning

Indicates the warning code that occurred most recently.

Software Version

Indicates the version of software incorporated into the unit.

Release Date

Indicates the release date of software incorporated into the unit.

Support Name

Indicates your support service provider.

Support Phone

Indicates the phone number of your support service provider.

Support Email

Indicates the email address of your support service provider.

Summary of Contents for LB-DH8 series





















































































































































Search results

Summary of Contents for LB-DH8 series

Reviews:

Related manuals for LB-DH8 series

Brands by name

Popular brands

Panasonic LB-DH8 series, Operator'S Manual

Search results

Summary of Contents for LB-DH8 series

Reviews:

Related manuals for LB-DH8 series

Brands by name

Popular brands