Panasonic LB-DH8 series Operator'S Manual Download Page 51

Page: 51 / 148

Operations

Operating the control panel

S.M.A.R.T. <Monitor>

Indicates a replacement recommended component or a replacement mandatory component, if any.

Good: Normal.
Warning: Useful life is about to expire. Replacement is recommended.
Critical: Operation is no longer possible due to malfunction or other causes. Replacement is mandatory.

Flash Memory

Indicates information for the flash memory in the unit.

FAN

Indicates combined information for the regular fan and the redundant fan.

Changer

Indicates information for the changer unit.

Drive

Indicates information for the drive system.

Magazine

Indicates information for magazines.

Summary of Contents for LB-DH8 series





















































































































































Search results

Summary of Contents for LB-DH8 series

Reviews:

Related manuals for LB-DH8 series

Brands by name

Popular brands

Panasonic LB-DH8 series, Operator'S Manual

Search results

Summary of Contents for LB-DH8 series

Reviews:

Related manuals for LB-DH8 series

Brands by name

Popular brands