Panasonic KX-NS300CN, Pc Programming Manual

Page: 544 / 884

12.1.4 PBX Configuration—[4-1-4] Extension—Wired
Extension—Flexible Button
Overview
Each flexible button can be customised to allow one-touch access to a certain feature. A maximum of 84 flexible
buttons can be customised for each extension. Select the desired extension from the
Extension Number /
Name list.
Copying Flexible Button Settings
To copy the flexible button settings of an extension to another extension, click Copy to . This operation (Copy
to) is available at the User (Administrator) level.
For more information on flexible buttons, see "2.21.2 Flexible Buttons" in the Feature Guide.
Once flexible buttons have been programmed, the Terminal Label Print utility can be used to print label sheets,
which can be attached to extension telephones for quick reference. For details, see
1.2.2.1 Editing and
Printing Terminal Labels in Off-line Mode .
Type
Specifies the feature to be assigned to the flexible button.
Value Range
Not Stored, Loop CO, Single CO, Group CO, DSS, One-touch, ICD Group, Message Waiting, FWD/DND
(Both), FWD/DND (External), FWD/DND (Internal), Group Fwd (Both), Group Fwd (External), Group Fwd
(Internal), Account, Conference, Terminate, EFA, Charge, Call Park, Call Log, Log-in/Log-out, Hurry-up,
Wrap-up, System Alarm, Time Service, Answer, Release, TRS Level Change, ISDN Service, CLIR, COLR,
ISDN Hold, Headset, Time Service - Automatic/Manual, Check In, Check Out, Cleaned Up, Two-way
Record, Two-way Transfer, LCS, Voice Mail Transfer, NDSS, CTI, PDN, SDN, DN
PC Programming Manual References
12.1.4.1 PBX Configuration—[4-1-4] Extension—Wired Extension—Flexible Button—Flexible button data copy
Parameter Selection (for Single CO)
Specifies the trunk to be accessed.
Value Range
1–142
Feature Guide References
2.5.5.3 Trunk Access
Parameter Selection (for Group CO)
Specifies the trunk group to be accessed.
Value Range
1–64
544 PC Programming Manual
12.1.4 PBX Configuration—[4-1-4] Extension—Wired Extension—Flexible Button