Panasonic KX-NS300CN, Pc Programming Manual

Page: 339 / 884

Receive Digits
Specifies the maximum number of digits to be received from a DDI/DID number when receiving a call with the
DDI/DID number.
Value Range
0–15
CPC Detection Time—Out, In
Specifies the length of time required by the PBX to detect a CPC signal on outgoing or incoming trunk calls
before disconnecting the line. When None is selected here, the line will not be disconnected when a CPC signal
is not detected.
Value Range
None, 80 x n (n=2–75) ms
Feature Guide References
2.11.9 Calling Party Control (CPC) Signal Detection
DTMF Width
Selects the length of the DTMF tone sent to the E1 channel.
Value Range
80 ms, 160 ms
Ringback Tone to Outside Caller
Enables the PBX to send a ringback tone to an outside caller when the network cannot send the tone.
Value Range
Disable, Enable
Dial Tone to Extension
Enables the PBX to send a dial tone to an extension making a call when the network cannot send the tone.
Value Range
Disable, Enable
Answer Wait Timer (*60s)
Selects the length of time that the PBX waits for the called outside party to answer an outgoing trunk call. The
line will be disconnected automatically when this timer expires.
Value Range
None, 1–4
PC Programming Manual 339
9.31 PBX Configuration—[1-1] Configuration—Slot—Port Property—E1 Port