Panasonic KX-NS300CN, Pc Programming Manual

Page: 114 / 884

7.4 Utility—Monitor/Trace
7.4.1 Utility—Monitor/Trace—ISDN/QSIG Protocol Trace
This utility collects protocol trace data from the PRI card, and displays it on the PC.
This option is only available at Installer level in On-line mode, and requires that the target PRI card be set to
INS status.
Protocol trace data is continually accumulated on ISDN cards, and 3 types of data can be downloaded:
•
Real Time Trace : Pseudo-real-time data is collected through data polling at one-second intervals. The
displayed information is updated beginning when the Start button is clicked.
•
Accumulation Trace : Previously accumulated data is retrieved and displayed.
•
Error Accumulation Trace : Previously accumulated error data is retrieved and displayed. This trace
shows the data snapshot that is taken just before a card resets.
To view trace data
1.
From the Shelf-Slot No. drop-down list, select the target slot. Each card will be preceded by a 2-digit
number, following the pattern "X-Y":
•
X : Shelf number (1-4)
–
1: KX-NS300 basic unit
–
2: Expansion Unit1
–
3: Expansion Unit2
–
4: Expansion Unit3
•
Y : Slot number (1-7)
2.
From the Trace Data Type drop-down list, select the type of data to view.
3.
Click Start .
Trace information will be displayed.
4.
Select an option:
•
Click Capture to save the displayed trace information.
•
Click Clear to clear the screen display.
5.
Click Cancel to return to the main screen.
114 PC Programming Manual
7.4.1 Utility—Monitor/Trace—ISDN/QSIG Protocol Trace