Panasonic KX-NS300CN, Pc Programming Manual

Page: 790 / 884

Company Telephone No. (Up to 32 digits)
Specifies the company’s telephone number. When the recipient has failed to retrieve the sender’s message
because of he or she did not enter the correct password, the system announces the company’s telephone
number to the caller. The caller can later call the company for assistance or to speak to the message sender.
Value Range
Max. 32 digits
Intercom Paging Parameters
Unified Messaging Intercom Paging functions in conjunction with the Intercom Paging feature of the PBX. It
allows the system to page the called party (announce the caller’s name, line number, etc.) while the caller is
placed on hold. To utilise this feature, Intercom Paging must be available for the PBX, and the Unified
Messaging system must be properly programmed.
No Answer Time for Intercom Paging (1-30 s)
Specifies the length of time (in seconds) the system waits before concluding Intercom Paging when there is
no answer. The system will return to the caller if the paged party does not respond before this timer expires.
Value Range
1–30 s
Feature Guide References
3.2.1.23 Intercom Paging
Announcement Repeat Cycle (1-3 times)
Specifies the number of times the system announces the page.
Example:
"I have a call for (name)".
Value Range
1–3 times
Feature Guide References
3.2.1.23 Intercom Paging
Intercom Paging Retry (1-10 times)
Specifies the number of times to retry paging when the called subscriber has set Incomplete Call Handling
for No Answer / Incomplete Call Handling for Busy to "Page the mailbox owner by intercom paging" and
the subscriber is busy or if there is no answer.
Value Range
1–10 times
790 PC Programming Manual
24.4 UM Configuration—[5-4] System Parameters—Parameters