Panasonic KX-NS300CN, Pc Programming Manual

Page: 351 / 884

9.37.1.1 PBX Configuration—[1-5-1] Configuration—DSP
Resource—Setting—DSP Resource Advisor
The DSP Resource Advisor assists programmers in the allocation of DSP resources to various PBX functions.
1.
Note the value of Total Power . This is the total capacity for allocating DSP resources, depending on the
DSP card installed in the PBX.
2.
In the Ports column, enter the number of ports to allocate to each PBX function.
3.
For voice calls, it is useful to estimate how often each call function is used, as every extension or trunk is
not in use all the time. In the
Busy Ratio (%) column, specify the anticipated ratio of time the type of voice
call function will be used.
4.
As values are entered, the values in the Power column will increase to reflect the resource required for
the input amounts. Likewise, the value for Free resources (G.711) will decrease.
Note
Click Clear to reset the input values and start again.
5.
When all items are allocated, confirm that the amount of resources input does not exceed the value
indicated in
Total Power .
•
Click Apply to insert the specified allocation settings into the DSP Resource—Setting screen.
•
Click Cancel to return to the DSP Resource—Setting screen without making any changes.
For details, refer to "5.5.4.2 DSP Resource Advisor" in the Feature Guide.
PC Programming Manual 351
9.37.1 PBX Configuration—[1-5-1] Configuration—DSP Resource—Setting