Panasonic HL-C2 Series, User Manual, Page: 79 / 278

Chapter 4 Explanation of Functions
4-5
4
Cl
as
s
Function Details Initial value
Memory
change*1
Ref.
Page
O
U
T
S
et
ti
ng
Analog Output at
Alarm Sets the analog output status at
alarm operation.
Hold previous
value

4-48
Fixed Value
Fixes the analog output status
at alarm operation.
+10.800[V]

Analog Output at
Data Unfixed Sets the analog output status at
data unfixed.
-10.800[V]

4-49
Digital Output at
Alarm Sets the digital output status at
alarm operation. Hold previous
value

4-50
Alarm Output Delay
Retards output from the alarm
terminal.
ON

4-51
Digit Number of
Measurement Value
Sets the display digits number
of measurement value on
compact programmable display.
5 digits

4-52
Analog Output at
Data Unfixed Sets the analog output status at
data unfixed.
-10.800[V]

4-49
C
om
m
on
S
et
ti
ng
Sampling Cycle
Sets the sampling cycle for
measurement.
40µs

4-53
Terminal Input
Control Sets that two sensor heads can
be operated by one terminal input.
Independent

4-55
Chattering Prevention
for Terminal Input Prevents chattering of terminal
input.
ON1

4-56
Judgment Output Off
Delay Delays the timing of switching ON
to OFF of the judgment output.
OFF

4-57
Interference
Prevention Prevents interference between
2 sensor heads.
OFF

4-58
S
y
s
tem
S
et
ti
ng
Display Update Cycle
of Measurement Value Sets the update cycle of
measurement value display.
Standard

4-59
Change Indication
Unit
Changes the indication unit of
the measurement value on
compact programmable display.
mm unit

4-61
Copy Output Setting
Copies the setting contents of “OUT Setting”
between memories.
X 4-62
Priority Setting of
Memory Change
Sets the terminals and commands.

4-63
Memory Change Changes memory for saving the setting contents.

4-64
Memory Copy
Copies the saved contents in a memory to
another memory.
X 4-65
Initialization Initializes the memory settings in current using.
X 4-66
Initialize All Memory Initializes all memory settings.
Save Saves all memory settings. X 4-68
Communication:
COM Port
Sets RS-232C communication.

4-69
Baud Rate Sets the communication speed. 115200bps
Data Length Sets the number of bits of data.
8bit
Parity Sets the parity. None
*Memory Change

: Maximum 16 settings can be saved by performing memory change.
X : Settings cannot be changed by performing memory change.

:Settings are saved as common settings of all memories. Settings per each memory
cannot be executed.