Panasonic HL-C2 Series, User Manual, Page: 109 / 278

Chapter 4 Explanation of Functions
4-35
4
■ Hold
This function stops the updating of the measurement value display.
The updating of the measurement value display is stopped by touching the Hold button
on the compact programmable display. This is a function only available for compact
programmable display.
The instantaneous measurement value can be read at the compact programmable
display by locking the updating of the measurement value display at the desired timing.
· This function does not hold the measurement display of the analog output,
judgment output, alarm output, and Intelligent Monitor AiM.
· The hold function for the analog output, judgment output, and alarm output
on the external terminal I/O shall be controlled by “Timing“ function.
· The “Hold” status of compact programmable display is not stored even by
executing “Save” function.
● How to use
1
Display the “OUT1 (or OUT2) operation” screen.
2
Touch the Hold key to hold the
measurement value.
3
Touch the Hold key again to release the hold input.
“Hold” is released. “Hold” in progress
Selection screen of OUT1 Selection screen of OUT2