Panasonic HL-C2 Series, User Manual, Page: 122 / 278

Chapter 4 Explanation of Functions
4-48
4
■ Analog Output at Alarm
This function sets the analog output status when an alarm is issued.
It can select whether holding the previous value or setting a fixed value for the
analog output under an alarm operation status (poor light intensity, or measurement
disabled when a target object goes off the measurement range).
· The input range of fixed value is -10.800 to +10.800[V], and the initial value is
+10.800[V].
· The current output varies on load impedance. The maximum value is 25.0[mA].
· Check the input range of AD board before setting.
· Before setting of analog output at alarm, read
“4-4-1 Alarm Setting and
Outputs ” carefully.
● How to use
1
Display the “Analog Output at Alarm” screen.
2
Touch the “Analog Output at Alarm” key.
The display is changed between
Hold Pre Val and Fixed Value each
time the key is touched.
When selecting “Fixed Value”
3
Touch the key.
The screen for inputting the fixed value appears.
4
Input the fixed value.
(1) Touch the
OUT1
(or
OUT2
) key to
prepare for inputting the setting value.
(2) Input the value.
(3) Touch the key to confirm the value.
Selection screen of OUT1 Selection screen of OUT2
2 3
1