Panasonic HL-C2 Series, User Manual, Page: 158 / 278

Chapter 4 Explanation of Functions
4-84
4
4-4
Supplemental Explanation
This section provides supplemental explanation for enhancing
understandings of the system functions.
4-4-1
Alarm Setting and Outputs
“Alarm status” means the measurement disabled status due to poor light intensity or out of
measurement range.
*1 In case of selecting “A+B” for the output selection, an alarm is output when
either of the sensor head A or B goes into an alarm status.
Function
Alarm Delay Times
Holds the previous normal value up to the setting number
of times when an alarm is issued.
Refer to “Alarm Delay Times”.
Digital Output at Alarm
Sets the measurement value display in case that an alarm status
continues more than the setting number of times.
Refer to
“Digital Output at Alarm”.
Analog Output at Alarm
Sets the analog output value in case that an alarm status continues
more than the setting number of times.
Refer to “Analog Output at Alarm”.
Alarm Output Delay
Enables the alarm output at a real time regardless of the
alarm delay times.
Refer to “Analog Output Delay” .
A
lar
m
de
la
y t
im
es
Sensor head A
Alarm output
Digital output at alarm
Analog output at alarm
OUT1
A
lar
m
de
la
y t
im
es
Sensor head B
Alarm output
Analog output at alarm
Digital output at alarm
OUT2
Alarm delay only can be set to
“OFF” by the setting of “Alarm
Output Delay”.
Alarm delay only can be set to
“OFF” by the setting of “Alarm
Output Delay”.
A
lar
m
s
ta
tus
A
lar
m
s
ta
tus
O
ut
put
s
el
ec
ti
on
*
A
lar
m
out
pu
t del
ay
A
lar
m
out
put
del
ay