Panasonic HL-C2 Series, User Manual, Page: 101 / 278

Chapter 4 Explanation of Functions
4-27
4
■ Refractive Index Calculation
This function reflects the setting refractive index to the measurement result.
When the “Refractive Index Calculation” function is set to “ON” for
measuring a transparent object, the setting refractive index becomes effective
and it is reflected in the measurement result. For measuring the thickness of a
transparent object, set the function to “ON”, for measuring the clearance of a
transparent object, set it to “OFF”. When the function is set to “OFF”, the
setting refractive index is not reflected in the measurement result.
The setting of the transparent object can be performed only when “A”, “-A”,
“B”, or “-B” of [Transparent Object] is selected at the “Output Selection”.
· Set the “Installation Mode” to the specular reflection. (Note that the mounting method of the
sensor head is different between specular and diffuse reflection.)
· When a single surface (1st, 2nd, 3rd, 4th, Max surface) is selected, the function is invalid
even if the function is set to “ON”.
● How to use
1
Display the “Output Selection” screen.
Selection screen of OUT1 Selection screen of OUT2
1st surf.- front ref.
Max surface
“Measurement Surface Reference”
Near setting
▼
Transparent/glass
Clearance (space)
Transparent/glass
Transparent/glass
Clearance (space)
Near
Far
Front surface
→
Rear surface
→
3rd surface
→
4th surface
→
5th surface
→
6th surface
→
2nd surf.- rear ref.
3rd surf.-3rd surf. ref.
4th surf.-4th surf. ref.