Panasonic HL-C2 Series, User Manual, Page: 143 / 278

Chapter 4 Explanation of Functions
4-69
4
■ Communication: COM Port
This function specifies the baud rate, the data length, and parity for
RS-232C communication.
These settings are used for communication with PC using RS-232C connector.
Make sure to save the changed setting values, and then restart the power supply of
the controller to validate the settings.
Setting item Details
Baud rate
Sets the communication speed.
Select from 9,600bps/19,200bps/38,400bps/115,200bps.
Data length
Sets the data bit number.
Select from 7bit/8bit.
Parity
Sets the check bit for securing the reliability of communication.
Select from even/odd/none.
For more further detail of RS-232C communication, refer to “5-1 RS-232C
Communication Control” .
● How to use
1
Display the “Communication: COM Port” screen.
Baud Rate setting
2
Touch the “Baud Rate” key to select the
communication speed.
The display is changed as below each time the
key is touched.
Data length setting
2
Touch the “Data Length” key to select the
data length.
The display is changed between
8 （
8bit
）
and
7 （
7bit
）
each time the key is touched.
Parity Setting
2
Touch the “Parity” key to select the parity
setting.
The display is changed as below each time the
key is touched.
115,200bps 19,200bps 9,600bps 38,400bps
Odd Even None