Panasonic HL-C2 Series, User Manual, Page: 94 / 278

Chapter 4 Explanation of Functions
4-20
4
3
Set/change the measurement value or correction value.
For setting or changing method of the measurement value and correction
value, refer to “ For inputting the measurement value or correction
value ” and “ For loading the measurement value from the current value ”.
4
Touch the Excute key.
*Touch the Cancel key to cancel changing
the value.
Calibration starts with the setting value.
For inputting the measurement value or
correction value
1
Touch the
Meas A
,
Meas B
,
Corr a
,
or
Corr b
key to be input.
The screen for inputting the setting value appears.
2
Input the setting value (1), then, touch the
key (2) to confirm the setting.
3
Touch the Return key to return to the
step1 screen.
For loading the measurement value from
the current value
1
Touch the
Load
key.
The screen for loading the measurement value
appears.
2
Touch the
Load Meas Val A from Curr val.
key.
The measurement value is loaded from the current
value.
3
Touch the
Return
key to return to the
step1 screen.
The setting contents of the output selection for OUT setting are reflected in
the current value. Set OUT1 to “A” and OUT2 to “B” for the output selection.
1 2