Panasonic HL-C2 Series, User Manual, Page: 99 / 278

Chapter 4 Explanation of Functions
4-25
4
■ Transparent Object
This function selects a measurement surface from several surfaces in a
transparent object.
According to the setting of “measurement surface reference”, select a measurement
surface in a transparent object. Single or several surfaces can be selected from 1st to the
maximum surface. ( Refer to the example of the next page.)
・
This function is valid when A Tr, B Tr, -A Tr, or –B Tr is selected at the
“Output Selection”. (If one of the above is not selected, the setting screen of
this function does not appear.)
*Maximum seven surfaces can be detected.
· Set the “Installation Mode” to the specular reflection. (Note that the mounting
method of the sensor head is different between specular and diffuse reflection.)
· Before measuring a transparent object, make sure to set the recommended
measurement mode for specular reflection.
· For selecting a measurement surface, confirm the setting of “Measurement
Surface Reference”. The measurement surface is changed by setting the
measurement surface reference. If the setting is wrong, the measurement cannot
be performed accurately.
[Measurement surface reference]
Near setting
[Measurement surface reference]
Far setting
1st surf.- front ref.
2nd surf.- rear ref.
3rd surf.-3rd surf. ref.
Max. surface*
Transparent/glass
Clearance (space)
Near
Far
Front surface
→
Rear surface
→
3rd surface
→
4th surface
→
5th surface
→
6th surface
→
4th surf.-4th surf. ref.
Max surf*.- front ref.
4th surf.- 3rd surf. ref.
3rd surf.- 4th surf. ref.
2nd surf.- 5th surf. ref.
1st surf.- 6th surf. ref.
Transparent/glass
Transparent/glass
Clearance (space)