Panasonic HL-C2 Series, User Manual, Page: 133 / 278

Chapter 4 Explanation of Functions
4-59
4
4-3-4
System Setting
■ Display Update Cycle of Measurement Value
This function sets the display update cycle of the measurement value on the
compact programmable display.
Set the display update cycle to slower (longer) as possible because fast (short)
display update cycle causes the measurement value display hard-to-read due to
quickly change in the measurement value.
Setting Function
Fast Updates at each sampling cycle.*
Standard
Updates at each approx. 0.3ms.
Slow Updates at each approx. 500ms.
Very slow Updates at each approx. 1000ms.
*Note that the limitation of programmable display speed is applied to this cycle.
This setting is applied to the measurement value display of compact programmable
display, alarm output, strobe output, and judgment output.
Terminal outputs (analog output, alarm output, strobe output, judgment output) are
updated at every sampling cycle.
“Display Update Cycle of Measurement Value” can be set at either of “System” menu or
“Measurement Value” menu. Setting at either of them is reflected in another menu
setting.
● How to use
Setting at “System” menu
1
Display “Update Cycle of Meas Val” screen.
2
Touch the “Update Cycle of Meas Val” key to
select the setting.
The display is changed as below each time the
key is touched.
Slow Standard Fast Very Slow