Panasonic HL-C2 Series, User Manual, Page: 80 / 278

Chapter 4 Explanation of Functions
4-6
4
Cla
s
s
Function Details Initial value
Memo
ry
chang
e*
Ref.
page
S
y
s
te
m
S
e
tt
in
g
RS-232C Output
Makes the settings of the measurement data output
for RS-232C communication.

4-70
RS-232C Output
Mode Sets the output mode of the
measurement data.
Handshake
RS-232C Output Type
Sets the output type of the
measurement data.
OUT1
Console Setting
Performs various settings for compact
programmable display.

4-72
Panel Lock
Prevents any error settings due to
misoperation of compact
programmable display.
OFF
Start-up Screen
Selects the next displaying screen
after wake-up screen of compact
programmable display.
OUT1 Display
Screen
B
uf
fer
ing
S
et
ti
n
g
Self-stop
Stops buffering operation
automatically.
OFF X 4-77
Buffering Mode
Loads the measurement data to
PC by accumulating the data in the
controller.
Continuous
mode
X 4-77
Buffering Type Selects the accumulating output. OUT1 X 4-79
Buffering Rate
Loads the measurement data for a
long-duration by decimating the
measurement data during data
accumulation.
1 X 4-79
Accumulation Amount
Sets the accumulation data
amount.
20000 data X 4-79
Trigger Conditions
Sets the conditions of trigger
generation. At timing input
on
X 4-80
Trigger Delay
Delays the timing of accumulation
after the trigger generation.
0 X 4-81
Trigger Point
Sets the trigger generation position
in the accumulated data.
10000 X 4-81
Sample Trigger
Accumulation Amount Sets the accumulation data amount
at every trigger generation.
1 X 4-81
Status Readout Checks the operation status of accumulation. X 4-82
Last Data Point
Reads out the accumulation status from the
measurement data amount.
X 4-82
Data Read Reads out the accumulated data. X 4-83
*Memory Change

: Maximum 16 settings can be saved by performing memory change.
X : Settings cannot be changed by performing memory change.

:Settings are saved as common settings of all memories. Settings per each memory
cannot be executed.