Panasonic HL-C2 Series User Manual Download Page 135

Page: 135 / 278

Chapter 4 Explanation of Functions

4-61

■Change Indication Unit

This function is used for changing the indication unit of the measurement value
on compact programmable display.

The indication unit of the measurement value is selectable from mm unit and
µm unit.

・

This function is invalid for the setting value indication. The setting value is

always indicated in mm unit.

・

When selecting µm unit, the setting of “Digit Number of Measurement

Value” becomes invalid.

● How to use

Display “Change Indi. Unit” screen.

Switch the setting of Indication Unit.

The display is switched

mm Unit

and

µm Unit

each time the “Indication Unit” key is

touched.

Summary of Contents for HL-C2 Series























































































































































































































































































Search results

Summary of Contents for HL-C2 Series

Reviews:

Panasonic HL-C2 Series, User Manual, Page: 135 / 278

Search results

Summary of Contents for HL-C2 Series

Reviews: