manualshive.com logo in svg

Panasonic DP-C321, Service Handbook

The Panasonic DP-C321 Service Handbook is an essential manual for maintaining and troubleshooting the DP-C321 printer. Download this comprehensive guide free at manualshive.com, empowering you to optimize performance and resolve technical issues efficiently. Unlock the full potential of your Panasonic DP-C321 with this indispensable resource.

Share
Download
background image

vii 

Table of Contents

016-958  Size Mismatch 1 SMH Size Mismatch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-97
016-959  Size Mismatch Tray 1 Size Mismatch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-97
016-960  Size Mismatch Tray 2 Size Mismatch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-97
016-961  Size Mismatch Tray 3 Size Mismatch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-97
016-962  Size Mismatch Tray 4 Size Mismatch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-97
016-965  ATS/APS No Paper APS/ATS NG (No Paper). . . . . . . . . . . . . . . . . . . . . . . . . . . .3-97
016-966  ATS/APS No Destination Error ATS/APS NG (Other than No Paper). . . . . . . .3-97
016-981  FULL status was detected at HD access. FULL status was not cleared 

even during waiting for timing.  (One or more pages are already stored.)  . . . . .3-97

016-982  FULL status was detected at HD access.  FULL status was not cleared even 

during waiting for timing.  (No pages can be stored.). . . . . . . . . . . . . . . . . . . . . . .3-98

016-985  SCAN_TO_EMAIL_DATA_SIZE_OVER  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-98
020-506  No ability at destination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-99
020-507  Password check error . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-99
020-510  DTMF protocol error . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-99
020-511  No file transfer ability at destination. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-99
020-512  Detect endless loop during remote relay broadcast . . . . . . . . . . . . . . . . . . . . . . . .3-99
020-513  Receive illegal command on TRESS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-99
020-514  Requested invalid function on TRESS  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-99
020-515  Receive illegal command  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-99
102-310  Send Queue Full  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-100
102-311  Receive Queue Full . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-100
102-312  EVM Uses Wrong API . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-100
102-313  AS Uses Wrong API . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-100
102-314  Wait Event Time Out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-100
102-315  CTS Internal Failure  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-100
102-316  Send Request Queue Full SIO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-100
102-317  Receive Message Queue Full  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-100
102-318  Receive Finish Queue Full . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-100
102-319  Send Failure with No ACK  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-100
102-320  Polling Failure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-100
102-321  Send Message Failure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-100
102-322  Target Failure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-100
102-323  Address Failure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-100
102-324  Size Failure  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-100

102-325  Object Creation Failure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-100
102-326  Memory Overflow. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-101
102-327  Button Overflow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-101
102-328  UI Internal Failure with Out of Area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-101
102-329  UI Internal Failure with Invalid Coordinates . . . . . . . . . . . . . . . . . . . . . . . . . . .3-101
102-330  Interface Failure with Invalid Parameter LCD . . . . . . . . . . . . . . . . . . . . . . . . . .3-101
102-331  UI Internal Failure with Invalid LED Request . . . . . . . . . . . . . . . . . . . . . . . . . .3-101
102-332  Interface Failure with Invalid Parameter CP  . . . . . . . . . . . . . . . . . . . . . . . . . . .3-101
102-333  Interface Failure with Impossible Communication. . . . . . . . . . . . . . . . . . . . . . .3-101
102-334  Interface Failure with Receiving Error Key Code  . . . . . . . . . . . . . . . . . . . . . . .3-101
102-335  Interface Failure with Receiving Invalid Coordinates  . . . . . . . . . . . . . . . . . . . .3-101
102-336  Interface Failure DM - ACD Drv. I/F . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-101
102-337  Frame Data Error with Invalid Data Type3-100. . . . . . . . . . . . . . . . . . . . . . . . .3-102
102-338  Frame Data Error Offset Address Out of Scope . . . . . . . . . . . . . . . . . . . . . . . . .3-102
102-339  Display Request Code Invalid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-102
102-340  Interface Failure GUAM - DM I/F . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-102
102-341  Event Queue Full  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-102
102-342  Event Queue Empty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-102
102-343  Invalid Class  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-102
102-344  Invalid Type. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-102
102-345  Timer Queue Full . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-102
102-346  Invalid Timer Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-102
102-347  Undefined Trap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-102
102-348  Command Access Exception  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-102
102-349  Invalid Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-102
102-350  Privilege Command  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-103
102-351  No FPU Exception. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-103
102-352  Address Misalign. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-103
102-353  Data Access Exception . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-103
102-354  Tag Overflow. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-103
102-355  No Co Processor Exception . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-103
102-356  Short of Area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-103
102-357  Cancel Wait Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-103
102-358  Time Out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-103
102-359  Queue Overflow  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-103

Summary of Contents for DP-C321





































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for DP-C321

BALCO PrintMaker Instruction Manual preview
PrintMaker
Brand: BALCO Pages: 24
Xerox WorkCentre Pro 32 Specification preview
WorkCentre Pro 32
Brand: Xerox Pages: 14
Xerox DocuPrint C3300 DX User Manual preview
DocuPrint C3300 DX
Brand: Xerox Pages: 200
Minolta PagePro 8 Manual preview
PagePro 8
Brand: Minolta Pages: 227
IBM InfoPrint 1650 Configuration Manual preview
InfoPrint 1650
Brand: IBM Pages: 4
RAYSHAPE Edge E1 User Manual preview
Edge E1
Brand: RAYSHAPE Pages: 41
Mita DP-1400 Instruction Handbook Manual preview
DP-1400
Brand: Mita Pages: 134
Ricoh Schmidt 3 Installation Manual preview
Schmidt 3
Brand: Ricoh Pages: 8
Epson Epson Stylus NX330 Service Manual preview
Epson Stylus NX330
Brand: Epson Pages: 63
Epson Epson M2170 Start Here preview
Epson M2170
Brand: Epson Pages: 4
Epson Epson Stylus NX330 User Manual preview
Epson Stylus NX330
Brand: Epson Pages: 221
Epson Epson Stylus NX530 User Manual preview
Epson Stylus NX530
Brand: Epson Pages: 251
Epson Epson Stylus NX330 Brochure preview
Epson Stylus NX330
Brand: Epson Pages: 2
Canon imageCLASS LBP325dn Getting Started preview
imageCLASS LBP325dn
Brand: Canon Pages: 36
Canon imageCLASS LBP161dn+ Getting Started preview
imageCLASS LBP161dn+
Brand: Canon Pages: 24
Canon ImageCLASS LBP720 Series Important Safety Instructions Manual preview
ImageCLASS LBP720 Series
Brand: Canon Pages: 20
Canon imageCLASS LBP6300dn Quick Setup Manual preview
imageCLASS LBP6300dn
Brand: Canon Pages: 2
Canon imageCLASS LBP6780dn Quick Setup Manual preview
imageCLASS LBP6780dn
Brand: Canon Pages: 2

Brands by name

Popular brands

Load more brands