Panasonic DP-C321 Service Handbook Download Page 173

Page: 173 / 548

3-99

Chapter 3 Troubleshooting

020-506 No Ability at Destination

[Detection Conditions]

The recipient machine does not

have the remote sort copy function.
[Actions] Perform the operation again.

020-507 Password Check Error

[Detection Conditions]

Password Check Error. Mailbox Number Error. No
polling reserved documents are found.

[Actions]

Perform the operation again.

020-510 DTMF Protocol Error

[Detection Conditions]

The system stopped

communication after receiving the command reject

command.

[Actions]

Perform the operation again.

020-511 No File Transfer Ability at Destination

[Detection Conditions]

The recipient machine does not

have the file transfer function.

[Actions]

Perform the operation again.

020-512 Detect Endless Loop During Remote Repaly

Broadcast

[Detection Conditions]

An infinite loop was detected at

the remote relay broadcast.

[Actions]

Perform the operation again.

020-513 Illegal Command on TRESS

[Detection Conditions]

The system received illegal command from the

sending machine at the remote maintenance.

[Actions]

Perform the operation again.

020-514 Requested Invalid Function on TRESS

[Detection Conditions]

The system received the remote maintenance request
from the sending machine but does not have the

function for it.

[Actions]

Perform the operation again.

020-515 Receive Illegal Command

[Detection Conditions]

DIS was received from the calling station. DCS was
received though the machine does not have the

capability. An illegal command was received.

[Actions]

Perform the operation again.

Summary of Contents for DP-C321





































































































































































































































































































































































































































































































































































Search results

Summary of Contents for DP-C321

Reviews:

Related manuals for DP-C321

Brands by name

Popular brands

Panasonic DP-C321, Service Handbook

Search results

Summary of Contents for DP-C321

Reviews:

Related manuals for DP-C321

Brands by name

Popular brands