Panasonic DP-C321 Service Handbook Download Page 40

Page: 40 / 548

2-15

Chapter 2 Maintenance

Adjustment

Procedure

Enter

DC355

Select the appropriate partition.

The following are information stored in each partition.

Select the work content.

Select an appropriate item and click the [Enter] button.

Follow the message and handle the situation.

ADJ1. 1. 9 IOT Lead Edge/Side Edge Registration Adjustment

Purpose

To align correctly the image produced on the IBT belt with those (lead and side) of the

paper.

Display of appropriate hard
disk column

Size
(GB)

Stored information and usages

MP All

All

All the items in Partition 1~6

MP Partition 1 (a)

2.0

Font, Form/Logo, SMB Folder (Config. txt, driver),
Job Template

MP Partition 2 (b)

2.0

Printing range

MP Partition 3 (c)

1.2

Scan, Mailbox, Security - Print

MP Partition 4 (d)

2.0

PLD, Others

MP Partition 5 (e)

2.0

Copying range

MP Partition 6 (f)

0.5

Spool Cont Control Information, Log

MP: Abbreviation of Multiple Purpose

Work Item

Details

Setup

Initialize the file system. It is required when the management data of
the file system corrupts and when lead errors occur.

Hard Disk Test
(Lead Verify)

Perform the lead verify diagnostics of all the designated sector
patitions. Sector numbers where a lead error is occurring will appear.

Troubleshooting

Perform the hard disk ROM check and controller diagnostics.

Trouble Prediction

Perform the SMART (Self-monitoring analysis and reporting
technology) that hard disk has, and predict latent troubles on the hard
disk.

Always check and perform the adjustment as needed after performing DC685 (Color
Registration Adjustment).

Following items are available for setting the lead edge and side edge.

Adjustable Modes

NVM

Lead Edge

• All (Batch adjustment for all trays)

• Tray

• Dup (Side 2 Adjustment)

• MSI (Plain Paper)

• MSI (Heavy Weight paper 1)

• MSI (Heavy Weight paper 2)

• 742-028

• 742-030

• 742-038

• 742-032

• 742-033

• 742-034

Side Edge

• All (Batch adjustment for all trays)

• MSI

• Dup (Side 2 Adjustment)

• 1 Tray

• 2 Tray

• 3 Tray

• 4 Tray

• Tray (2, 3, 4)

• 742-025

• 742-026

• 742-027

• 742-053

• 742-076

• 742-077

• 742-078

• 742-079

Summary of Contents for DP-C321





































































































































































































































































































































































































































































































































































Search results

Summary of Contents for DP-C321

Reviews:

Related manuals for DP-C321

Brands by name

Popular brands

Panasonic DP-C321, Service Handbook

Search results

Summary of Contents for DP-C321

Reviews:

Related manuals for DP-C321

Brands by name

Popular brands