manualshive.com logo in svg

Panasonic DP-C321, Service Handbook

The Panasonic DP-C321 Service Handbook is an essential manual for maintaining and troubleshooting the DP-C321 printer. Download this comprehensive guide free at manualshive.com, empowering you to optimize performance and resolve technical issues efficiently. Unlock the full potential of your Panasonic DP-C321 with this indispensable resource.

Share
Download
background image

3-73

Chapter 3 Troubleshooting

012-100  H-TRA ENTRANCE SENSOR ON JAM

Description  

The H-TRA ENTRANCE SENSOR does not 

detect paper within the specific time after the REGI CLUTCH 
(main Unit) was turned On. (The specified time differs 

 

depending on the paper size.)

BSD on : CH11.4 CH11.11A

DC330 Codes to be checked

DC330

 [012-103] H-TRA ENTRANCE SENSOR

DC330

 [012-060] GATE IN SOLENOID

DC330

 [012-001] FINISHER DRIVE MOTOR

Check Items

• The GATE IN SOLENOID for operation failure
• The GATE for not-smooth operation and operation failure
• The paper path failure for burr and foreign substance, etc.
• The H-TRANSPORT BELT for contamination, wear and a 

revolution failure

• The Sensor Actuator for breakage

012-102  H-TRA ENTRANCE SENSOR OFF JAM

Description  

Paper does not pass through the H-TRA 

ENTRANCE SENSOR within the specific time after the H-
TRA ENTRANCE SENSOR has detected the paper. (The 

 

specified time differs depending on the paper size.)

BSD on : CH11.4 CH11.11A

DC330 Codes to be checked

DC330

 [012-103] H-TRA ENTRANCE SENSOR

DC330

 [012-001] FINISHER DRIVE MOTOR

Check Items

• The H-TRANSPORT BELT for contamination, wear and a 

revolution failure

• The Sensor Actuator for return failure
• The GATE for not-smooth operation and operation failure
• The paper path failure for burr and foreign substance, etc.
• The H-TRA BELT DRIVE ROLLER for contamination, 

wear and a revolution failure

• The Drive Transmission Gear from the FINISHER DRIVE 

MOTOR for wear and breakage

• The DECURLER ROLLER for a revolution failure

012-104  H-TRA EXIT SENSOR ON JAM

Description  

The H-TRA EXIT SENSOR did not detect paper 

within the specific time after the H-TRA ENTRANCE 

 

SENSOR has detected the paper. (The specified time differs 
depending on the paper size.)

BSD on : CH11.4 CH11.11A

DC330 Codes to be checked

DC330

 [012-104] H-TRA EXIT SENSOR

DC330

 [012-001] FINISHER DRIVE MOTOR

Check Items

• The H-TRANSPORT BELT for contamination, wear and a 

revolution failure

• The SENSOR ACTUATOR for breakage and bending
• The paper path failure for burr and foreign substance, etc.
• The H-TRA BELT DRIVE ROLLER for contamination, 

wear and a revolution failure

• The Drive Transmission Gear from the FINISHER DRIVE 

MOTOR for wear and breakage

• The H-TRA and FINISHER for a docking failure 

012-106  H-TRA EXIT SENSOR OFF JAM

Description  

Paper does not pass through the H-TRA EXIT 

SENSOR within the specific time after the H-TRA EXIT 

 

SENSOR has detected the paper. (The specified time differs 
depending on the paper size.)

BSD on : CH11.4 CH11.11A

DC330 Codes to be checked

DC330

 [012-104] H-TRA EXIT SENSOR

DC330

 [012-001] FINISHER DRIVE MOTOR

Check Items

• The H-TRANSPORT BELT for contamination, wear and a 

revolution failure

• The Sensor Actuator for return failure
• The paper path failure for burr and foreign substance, etc.
• The H-TRA BELT DRIVE ROLLER for contamination, 

wear and a revolution failure

• The Drive Transmission Gear from the FINISHER DRIVE 

MOTOR for wear and breakage

• The H-TRA and FINISHER for a docking failure 
• The DECURLER ROLLER/PINCH ROLLER for a 

 

revolution failure

• The COMPILER ENTRANCE ROLLER for a revolution 

failure

Though it is possible to run the following Diag on 
the machine not installed with the Finisher, an error 
will be displayed.

Though it is possible to run the following Diag on 
the machine not installed with the Finisher, an error 
will be displayed.

Though it is possible to run the following Diag on 
the machine not installed with the Finisher, an error 
will be displayed.

Though it is possible to run the following Diag on 
the machine not installed with the Finisher, an error 
will be displayed.

Summary of Contents for DP-C321





































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for DP-C321

DataCard CP60 Quick Install Manual preview
CP60
Brand: DataCard Pages: 8
Oki C910 Service Manual preview
C910
Brand: Oki Pages: 282
MakerPi P2 Quick Start Manual preview
P2
Brand: MakerPi Pages: 21
Datamax ST-3210 Programmer'S Manual preview
ST-3210
Brand: Datamax Pages: 26
Samsung CLP-360 User Manual preview
CLP-360
Brand: Samsung Pages: 224
Canon MF5750 - ImageCLASS B/W Laser Remote Ui Manual preview
MF5750 - ImageCLASS B/W Laser
Brand: Canon Pages: 42
Canon TS8250 Online Manual preview
TS8250
Brand: Canon Pages: 521
Canon TS5350i Series Online Manual preview
TS5350i Series
Brand: Canon Pages: 456
Ricoh Aficio MP C6503SP User Manual preview
Aficio MP C6503SP
Brand: Ricoh Pages: 264
Copystar CS 5551ci Specifications preview
CS 5551ci
Brand: Copystar Pages: 4
UEi KMIRP2 Instruction Manual preview
KMIRP2
Brand: UEi Pages: 4
Glunz & Jensen NewsWriter XL Operating Manual preview
NewsWriter XL
Brand: Glunz & Jensen Pages: 104
Oki ES9455 Printing Manual preview
ES9455
Brand: Oki Pages: 204
IBM InfoPrint 1650 Configuration Manual preview
InfoPrint 1650
Brand: IBM Pages: 4
CNET CNP-101UW Specifications preview
CNP-101UW
Brand: CNET Pages: 2
Konica Minolta accuriopress c6085 Operation Manual preview
accuriopress c6085
Brand: Konica Minolta Pages: 81
EBS EBS-6500 Basic Manual preview
EBS-6500
Brand: EBS Pages: 20
Oki ML490 Series User Manual preview
ML490 Series
Brand: Oki Pages: 94

Brands by name

Popular brands

Load more brands