Panasonic AV-HS60C3G, Operating Manual

Page: 109 / 176

– 109 –
Chapter 6 Input/Output Signal Settings — Setting output signals
Setting output signals
The rear of the Gateway Unit is equipped with SDI connectors for input and output.
f
Each Gateway Unit can output 12G SDI signals to 6 systems.
f
The allocation of output signals for each terminal is performed by selecting top menu <IN OUT> button
→
[OUT ASSIGN]
→
[Assign] tab.
Assigning output signals
Assign output signals to [SDI OUT 1] through [SDI OUT 12].
1
Select the <IN OUT> button
→
[OUT ASSIGN]
→
[Assign] tab.
2
Set the output signals to assign.
f
Output signals that can be assigned are as follows.
ME1PGM, ME2PGM,
DSKPGM1, DSKPGM2
Outputs an image with the wipe, mix, key, downstream key or other effect to the switcher's main line output.
DSKPVW1, DSKPVW2
Preview output of DSKPGM1 and DSKPGM2. The background image can be selected from MEPGM or MEPVW shown
above.
AUX1 - AUX16 Outputs the signal selected by the 16 lines of AUX buses ([AUX1] to [AUX16]).
MV1, MV2
Outputs the MultiView display signal. Multiple input and output signals are reduced and output to a single screen.
(page 110)
ME1KEYPVW, ME2KEYPVW
Outputs the preview signal exclusively for the key.
ME1PVW, ME2PVW Outputs the preview signal for BKGD, KEY1, and KEY2 for each ME.
DSKEXT1-1, DSKEXT1-2,
DSKEXT2-1, DSKEXT2-2
These output signals can be set by the user.
f
For details on ME/DSK output signal settings, refer to “Setting the ME output and DSK output”.