Panasonic AV-HS60C3G, Operating Manual

Page: 25 / 176

– 25 –
Chapter 3 Part Names and Functions — Control Panel AV-HS60C2/AV-HS60C4
3 Source name display panels
Displays applications of the crosspoint buttons. The display settings of the source name display panels can be made from the <NAME> button on
the top menu
→
[SOURCE NAME]
→
[Panel Name] tab.
When operating other than macro bus: “crosspoint number” on the upper line, “input source name” on the lower line
When operating macro bus: “macro name” on the upper line, “input source name” on the lower line
4 PGM/A bus crosspoint buttons (AV-HS60C2: 1 to 24, AV-HS60C4: 1 to 16), PST/B bus crosspoint buttons (AV-HS60C2: 1 to 24, AV-HS60C4:
1 to 16)
Selects the video signals of the PGM/A bus and PST/B bus.
Source can be selected using the <2nd PAGE>/<3rd PAGE> button. (AV-HS60C2: Maximum of 96, AV-HS60C4: Maximum of 64) (page 25)
f
Bus mode can be selected from the <OPR> button on the top menu
→
[OTHER SETTINGS] column
→
[Bus Mode] tab.
5 <BUS SHFT> button
Press the <AUX 1/2> to <AUX 15/16>/<KEY1 F/S> to <KEY4 F/S>/<VMEM F/S>/<DSK1 F/S>/<DSK2 F/S> buttons while holding down the <BUS
SHFT> button to switch the bus selection applications. For the <AUX 1/2> to <AUX 15/16> buttons, the bus selection applications can be switched
even when the selected button is pressed again.
Example) <KEY1 F/S> button
When only the <KEY1 F/S> button is pressed, the KEY bus crosspoint buttons are switched to the source selector buttons of the KEY1 fill bus.
When the <KEY1 F/S> button is pressed while the <BUS SHFT> button is held down, the KEY bus crosspoint buttons are switched to the source
selector buttons of the KEY1 source bus.
6 <2nd PAGE>/<3rd PAGE> buttons
Switch the page to select the source with the KEY bus crosspoint buttons, PGM/A bus crosspoint buttons, or PST/B bus crosspoint buttons.
f
The pages of the buses included in the corresponding ME can be switched at once. To switch pages at individual buses, assign the <2nd
PAGE>/<3rd PAGE> button to the KEY bus crosspoint buttons, PGM/A bus crosspoint buttons, and the PST/B bus crosspoint buttons. (page 115)
Button status
Displayed page
<2nd PAGE> button <3rd PAGE> button
Off Off First page
Lit Off Second page
Off Lit Third page
Lit Lit Fourth page
7 <IMAG> button
These buttons cannot be used with the Live Production Suite.
8 Bus tally
Indicates the output status of the buses. The buses that comprise the on-air tallies will light up.
Multi-selection panel area
RECALL
STORE
DEL
4-1 4-3 4-2
4-4 4-6 4-5
4-7 4-9 4-8
OP STILL1
1
2
1 Mode selection button
Switches functions that can be operated on the multi-selection panel.
<BKGD WIPE> button Selects background wipe preset.
<SHOT MEM> button Registers/recalls/deletes register memories of the shot memory.
<EVT MEM> button
Recalls register memories of the event memory. This button is also used to select register memories during EMEM-LINK
transition.
f
Registration/editing are performed using the menu.
<VMEM> button
Records [CLIP1], [CLIP2] (video memory) and [STILL1], [STILL2] (still image memory) to the current frame memories
and plays them back.
<PLUG IN> button* Used as a plug-in software menu.
* This is a function to be supported in the future.
2 Multi-selection menu panel
When the mode selection button is pressed, the menu to be displayed is switched.
For details, refer to “Basic operations for the multi-selection panel area”.