Panasonic AV-HS60C3G Operating Manual Download Page 14

Page: 14 / 176

– 14 –

Chapter 2 Installation and Connection — Installation

Install the unit on a sufficiently strong, stable, and level surface for use.

Secure a space surrounding the ventilation holes on the front panel of the power supply unit and on the rear panel of the Control Panel AV-HS60C2/

AV-HS60C4 so that air circulation is not impeded.
In particular, ensure sufficient space between ventilation and wiring when using mounted in a panel or table.

Avoid installing the unit where it will be exposed to direct sunlight or to the hot air that is blown out from other products.

Installing the unit in a very humid, dusty or vibration-prone location may cause malfunction.

Installing the Menu Panel AV-HS60C3

Attach the panel using 4 mounting holes (M4 screw

4, 75 mm (2-15/16 inches) pitch) on the rear panel of the Menu Panel AV-HS60C3.

For details, refer to “Dimensions of the Menu Panel AV-HS60C3”.

Summary of Contents for AV-HS60C3G

















































































































































































Search results

Summary of Contents for AV-HS60C3G

Reviews:

Related manuals for AV-HS60C3G

Brands by name

Popular brands

Panasonic AV-HS60C3G, Operating Manual

Search results

Summary of Contents for AV-HS60C3G

Reviews:

Related manuals for AV-HS60C3G

Brands by name

Popular brands