Panasonic AV-HS60C3G Operating Manual Download Page 174

Page: 174 / 176

– 174 –

Chapter 11 Appendix — Glossary

Word

Explanation

Tally

The signal which outputs the program output statuses of the input signals to an external device.

The LED that indicates the program output status on the control panel is also referred to as tally.

Transition

A function that switches from one image to another. Wipe, mix and other effects are available for the images

during switching.

Tri-level Sync

The sync signal used for HD formats.

Trimming

This is the function that eliminates the unnecessary parts at the top, bottom, left and/or right of the images

which are combined using the Resizer function.

Video Memory

This is the memory in which the images (still images and moving images) with key signals can be stored.

Wipe

A video effect in which one image is gradually replaced by another as the boundary between the two is moved

using a preselected pattern.

Summary of Contents for AV-HS60C3G

















































































































































































Search results

Summary of Contents for AV-HS60C3G

Reviews:

Related manuals for AV-HS60C3G

Brands by name

Popular brands

Panasonic AV-HS60C3G, Operating Manual

Search results

Summary of Contents for AV-HS60C3G

Reviews:

Related manuals for AV-HS60C3G

Brands by name

Popular brands