Panasonic AV-HS60C3G, Operating Manual

Page: 85 / 176

– 85 –
Chapter 5 Basic Operations — Memory
For details, refer to “Registering to the register memory”.
Playing back the work memory to check
Play back the timeline in the work memory newly registered or edited to check.
1
Select the <MEM> button
→
[EVENT MEMORY]
→
[Prepare] tab.
2
Set [Edit] to [ON] to enter the edit mode.
f
When [OFF] is selected, the timeline in the work memory cannot be played back.
f
The items where [ME1], [ME2], [DSK], [AUX], [CBGD], [CLIP], and [XPT] in the [Target Select] column are set to [ON] can be played back.
3
Select the [Edit] tab.
4
Select the item to move the point for editing.
[<<Lead] Moves to the first event point.
[<Step] Moves to the previous event point.
[>Step] Moves to the next event point.
[>>Last] Moves to the last event point.
5
Select the [Prepare] tab.
6
Select an item in [Loop] in the [Play Setting] column.
[OFF] Stops at the last event.
[ON] Transitions from the last event to the first event.
7
Set an item in [Play Mode] in the [Play Setting] column.
[Normal] Playback is performed in the positive direction (event numbers in ascending order).
[Reverse] Playback is performed in the negative direction (event numbers in descending order).
8
Select an item in [Link] in the [Fader Play] column.
f
Playback of event memories can be linked with the fader lever operation.
[Off] Does not play back an event memory according to the fader lever operation.
[ME1]* Plays back an event memory according to the operation of the [ME1] fader lever.
[ME2]* Plays back an event memory according to the operation of the [ME2] fader lever.
* ME selected as playback target in the [Target Select] column is assumed by the event memory playback, so the button operation or fader operation will be
disabled when set to anything other than [Off].
9
Select an item in [Mode] in the [Fader Play] column.
f
Set the mode for fader link.
[Total] Assigns 0% to 100% of the fader lever operation to the total time of the event memory.
[Paddle] Assigns 0% to 100% of the fader lever operation to one event in the event memory.
10
Select the [Edit] tab.
11
Play a timeline in [Play] or [Pause].
f
The operation is disabled when anything other than [Off] is selected in Step
8
.
[Play] Plays back an event memory.
[Pause] Stops event memory playback.
Registering to the register memory
Register the event memory created on the work memory in the register memory.
1
Select the <MEM> button
→
[EVENT MEMORY]
→
[Register] tab.
2
Select [Store] in the [Register] column.
f
The [Store] screen is displayed.