Panasonic AV-HS60C3G Operating Manual Download Page 131

Page: 131 / 176

– 131 –

Chapter 8 System Menu — Boot operation settings

Boot operation settings

Boot mode settings

Select the <SYS> button

→

[BOOT]

→

[Boot] tab.

Select an item in the [Boot Mode] column.

Select the status of the switcher when it boots up.

[Resume]

The switcher boots up with the settings as they were immediately before it was turned off.

[Initial]

The switcher boots up with the initial settings as they were when it was delivered.

[Project]

The switcher boots up with the settings found in the specified project file.

Specify the project file by selecting [File Select] and then specifying it in the file selection dialog.

It is not possible to make settings to the detailed items loaded from the specified project file.

Summary of Contents for AV-HS60C3G

















































































































































































Search results

Summary of Contents for AV-HS60C3G

Reviews:

Related manuals for AV-HS60C3G

Brands by name

Popular brands

Panasonic AV-HS60C3G, Operating Manual

Search results

Summary of Contents for AV-HS60C3G

Reviews:

Related manuals for AV-HS60C3G

Brands by name

Popular brands