Panasonic AV-HS60C3G Operating Manual Download Page 22

Page: 22 / 176

– 22 –

Chapter 3 Part Names and Functions — System Manager Unit AV-LSS10

System Manager Unit AV-LSS10

Rear panel

$&,1

/$1

1 <LAN1> terminal (connector: RJ-45/signal: 1000BASE-T)

Used to connect the units in the switcher system or the control panel.

Use a GbE hub, etc., and connect all of the units according to the system connection plan.

2 <LAN2> terminal (connector: RJ-45)

For a future expansion feature. Do not connect a cable.

3 <AC IN 1>, <AC IN 2> terminals (signal: AC)

Connect the supplied AC Cables and insert each into an AC outlet. (AC100 V to 240 V, 50 Hz/60 Hz)

The supplied AC Cables have 3-pin plugs with grounding terminals. Plug into 3-pin outlets equipped with grounding terminals.

If you are unable to use 3-pin outlets, be sure to contact the place of purchase.

NOTE

The shielded cables to be connected to the <LAN> terminals should conform to 1000BASE-T.

Summary of Contents for AV-HS60C3G

















































































































































































Search results

Summary of Contents for AV-HS60C3G

Reviews:

Related manuals for AV-HS60C3G

Brands by name

Popular brands

Panasonic AV-HS60C3G, Operating Manual

Search results

Summary of Contents for AV-HS60C3G

Reviews:

Related manuals for AV-HS60C3G

Brands by name

Popular brands