Panasonic AV-HS60C3G, Operating Manual

Page: 126 / 176

– 126 –
Chapter 8 System Menu — ME unit settings
ME unit settings
Setting the ME output and DSK output
Video signals can be output in the ME1/ME2/DSK block as shown in the following figure. Each output can be assigned to the SDI OUT signal from the
<IN OUT> button
→
[SDI OUT]
→
[Assign] tab.
ME1
DSK
[Assign]
ME1PGM
ME1PVW
ME1CLN
ME1KEYPVW
ME2PGM
ME2PVW
DSKPGM1
DSKPVW1
DSKPGM2
DSKPVW2
ME2CLN
ME2KEYPVW
DSK EXT1-1, DSK EXT1-2
DSK EXT2-1, DSK EXT2-2
XPT BKGD
KEY1
KEY2
XPT BKGD
KEY1
KEY2
ME2
DSK1 DSK2
DSK1 DSK2
Setting the ME1 CLN/ME2 CLN output
Clean signals (before key effects were added) can be output. Key Out signals using key combinations can also be output.
1
Select the <SYS> button → [ME SETTINGS] → [ME1,2] tab.
2
Select an item in [Key Select] in the [ME1 CLN]/[ME2 CLN] column.
f
Select the keyer from [Key1], [Key2].
3
Select an item in [CLN/KOUT] in the [ME1 CLN]/[ME2 CLN] column.
[Clean]
Outputs clean signals before key effects of the keyer set in [Key Select] in the [ME1 CLN]/[ME2 CLN] column were
added.
[Keyout] Outputs key signals for the keyer set in [Key Select] in the [ME1 CLN]/[ME2 CLN] column.
[Combined] Outputs the combined key signal of KEY1, KEY2.
@ @ NOTE
t
DSK clean signals are output by allocating to DSK EXT1-1, DSK EXT1-2, DSK EXT2-1, or DSK EXT2-2.
t
DSK Key Out signals cannot be output.
Setting the ME1 KEYPVW/ME2 KEYPVW output
Preview output exclusive for key. Set whether to output signals with added keyer key effects to the PGM background.
It can be switched with the chroma key adjustment preview screen for the corresponding keyer when [Key1], [Key2] is selected on the top menu
<ME1>/<ME2> button → [KEY1], [KEY2] → [Chroma] → [Sample] → [Chroma PVW].
1
Select the <SYS> button
→
[ME SETTINGS]
→
[ME1,2] tab.
2
Select an item in [Key1], [Key2], [PinP1], [PinP2] in the [ME1 KEYPVW]/[ME2 KEYPVW] column.
[On]
Signals with added key effects of the corresponding keyer is output.
[Off] No signal is output.
3
Select an item in [Chroma PVW] in the [ME1 KEYPVW]/[ME2 KEYPVW] column.
[Enable] Displays the preview screen for chroma key adjustment in each preview output.
[Disable] Does not display the preview screen for chroma key adjustment in each preview output.