1
+
1
+
11
10
4
4
spa functions
Quick and easy step-by-step instructions to control the main functions and
to configure system settings of your spa from its in.k1000+ main spa keypad.
Turn Keypad On
Three minutes after the last pump is turned off,
the screen will shut off if there is no touch activity.
Touch the screen to turn on the keypad.
Then follow the instructions on the screen to
access the main screen.
All-On, All-Off Target Key
in.k1000+ features an all-on or all-off one touch
activation key. When pressed, it stops or starts all
working components and accessories at once.
From the home page, you can access the
following modes:
∙ Swim (if configured)
∙ Sanitization (with in.clear connected)
∙ Audio (with in.stream 2 connected)
∙ Colour (with in.mix installed)
∙ Spa
∙ Settings
To select a mode, slide the left wheel up or down
until the desired icon menu is highlighted in the
middle.
spa mode
Spa Mode
To select the spa mode, slide the left wheel up
or down until the spa icon is highlighted in the
middle.
The home page will display its equipment
start or stop keys, up and down buttons, water
temperature, messages and quick access to
display options:
∙ Display orientation
∙ Display contrast
To select an option, slide the right wheel up or
down until the desired icon menu is highlighted
in the middle.
Display Orientation
To modify the display orientation settings, slide
the right wheel until the display orientation icon is
highlighted in the middle.
Simply touch the line of the orientation you want
to select.
Start or Stop Accessories
To start or stop an accessory (i.e. pump, blower,
light) touch the associated icon. Icons will become
animated when their accessory is turn on, and
animation will stop when turned off.
Icons on the screen will reflect the speed or state
of the devices running on your spa. When an
accessory has more than one speed, press the
button until it reaches the desired speed.
Display Contrast
To modify the display contrast settings, slide
the right wheel until the display contrast icon is
highlighted in the middle.
Simply touch the line of the contrast you want
to select.
Water Temperature
The temperature at the bottom of the screen
shows the current water temperature. Use the Up
and Down icon to set the desired temperature.
The set point will appear in blue. After 3 seconds
without any changes to the set temperature value,
the current water temperature will reappear.
When the set value is lower than the current
temperature Cooling to xx.x will appear below.
When the set value is higher than the current
temperature, Heating to xx.x will be indicated
under the value. Normally there is a short delay
before the heating starts, during which Heating
Suspended is indicated under the value.
Sleep
Press the icon key to go directly into the sleep
mode. In sleep mode, water splashing on the
keypad can not inadvertently start/stop a pump.
direct to function
selection wheel:
water care -
heat pump (if installed) -
maintenance -
date & time -
keypad -
electrical configuration -
wifi -
miscellaneous -
about -
list of featured items
mode selection
wheel:
settings icon
settings
You can use the Settings mode to manage settings of your spa system.
To select the settings mode, slide the left wheel up or down until the settings icon menu is highlighted in
the middle.
In the Settings page you can access the following:
∙ Water Care
∙ Electrical Configuration
∙ Heat Pump (if installed)
∙ WiFi
∙ Maintenance
∙ Miscellaneous
∙ Date & Time
∙ About
∙ Keypad
To select an item, slide the right wheel until the desired icon is highlighted in the middle or press on the
menu name.
