1
+
1
+
23
22
4
4
mode selection
wheel:
in.mix icon
synchronization/
desynchronization
icon
colour mode
(only available if in.mix is detected among the spa accessories)
To select the colour mode, slide the left wheel up or down until the in.mix icon menu is highlighted in
the middle.
In the colour page you can access the following:
∙ Zone Selection
∙ Synchronizing Zones
∙ Changing Colours
∙ Intensity
∙ On/Off
Zone Selection
To select a zone, turn the right wheel until the
desired icon is highlighted in the middle.
This selection allows you to modify its colour.
Changing Colours
Once a zone has been selected, use the colour
wheel or the rainbow icon to choose the desired
colour.
On/Off
There are two ways to turn in.mix on or off. The
first is by using the Light icon on the SPA Screen.
The second is by touching the light bulb icons
located each side of the intensity bar.
zone 3
zone 2
zone 1
off
intensity
on
colour wheel
rainbow icon
in.mix functions
Synchronizing Zones
The synchronization/desynchronization icon
allows you to match the colour of the selected
zone with the other zones.
Intensity
Located at the bottom of the screen, the slider
allows you to modify the intensity of the colour.
too much water on display
Wipe Screen
This message appears when too much water is
detected on the touch screen. Simply wipe away
excess water.
installation error messages
Upon connecting the in.k1000+ to your spa system, you may see one of two error messages.
Please follow the instructions in the message or contact your dealer for more information.
Error messages on-screen list and definitions:
Refer to the troubleshooting and error codes section of the TechBook for your spa pack system.
9919-101601-B
Rev. 12-2019
www.geckoalliance.com
© Groupe Gecko Alliance Inc., 2020
All trademarks or registered trademarks are the property of their respective owners.
Printed in Canada
colour wheel
