8
8
27
26
5
5
Date & Time
Here you can adjust the time format, change the year,
date, and time. Use the arrows to choose the setting
that you want to adjust, and select it by pressing
key 2.
Use the arrow keys to change the parameters, and
key 2 to move between parameters. Key 1 will take
you back to the main Settings menu.
Keypad Settings
In this section, you can change the temperature
unit, language, display orientation, rim light colour*
and keypad security. Note the spa pack must be
configured accordingly to be able to change the rim
light colour.
Use the arrow keys to choose the setting that you
want to adjust. Select it by pressing key 2 then use
the arrow keys again to change the setting.
When you change the display orientation, the
contextual options and arrow keys adjust to the
chosen orientation. The Mode and Menu keys remain
unchanged, as well as the accessory keys in the main
Spa menu.
You can lock the keypad by selecting one of three
security levels: Unlock, Partial or Full. The Partial level
locks the set point adjustment and many options in
the settings menu. The Full level locks all keypad
functions. To unlock the keypad (either Partial or Full)
press and hold the top right key for five seconds.
* Since v23.00, if an in.mix is installed, you can
synchronize the colour of rim light with an
in.mix zone.
When you select Reset Reminders you will be
asked to confirm your choice. Doing so will reset all
maintenance reminders to default values.
Standby
The Standby mode allows you to service your spa.
Pumps will stop for 30 minutes, and automatically
restart after this time.
Once Standby mode has been activated, a screen will
appear to show that pumps are stopped. The spa page
will return at the end of maintenance.
Press on the Confirm key to leave Standby mode and
restart the spa.
Maintenance
From the Settings page you can access the
Maintenance menu, which gives you access to the
following options:
∙ Maintenance Reminders
∙ Standby
Use the Up and Down keys to make a selection, and
key 2 to confirm.
Maintenance Reminders
The in.k800 keypad will remind you of maintenance
required on your spa, such as rinsing or cleaning the
filter. Each task has its own duration, based on normal
use.
The Maintenance Reminders menu allows you to verify
the time left before maintenance is required, as well as
to reset the time once a task is completed.
Use the Up and Down keys to move through the list.
To reset a task, select it by pressing key 2, then confirm
when prompted. Once you have confirmed the task
will be reset.
Miscellaneous
In this section, you can change the Warm weather
and Info messages options (depending on pack
configuration).
You can bypass the pack filtration over-temperature
feature. When Warm weather is "Off", the filtration
over-temperature is disabled. This feature allows
the spa to continue filtering even through the water
temperature is high.
You can configure the main window message centre.
When set to Display, all information messages are
displayed without exception. When set to Hide, some
detailed messages are displayed when they occur to
keep the message centre simple.
About
This section shows information about the in.k800
software number, and the revision numbers of the
different components of your system.
For the WiFi menu to appear in the Settings menu,
your in.touch module must be equipped with
software version 11.00 or higher. This menu allows
you to connect your in.touch module to a WiFi
network or to change its network.
For more details about other in.touch connection
methods please see the in.touch Techbook.
To connect your in.touch module to a wireless
network, use the Up/Down keys to go to the WiFi
option in the Settings menu and press key 2 to
select it.
After a few seconds the available networks will
appear on the screen, as well as their signal strength.
Use the Up/Down keys to move through the list.
Select your network by pressing key 2.
If the WiFi network is password protected, enter it
when prompted.
∙ Use the arrow keys to choose your letters
∙ Use key 6 to move the cursor forward
∙ Use key 4 to change the type of character
(uppercase, lowercase, number, symbol)
∙ Use key 3 to backspace
∙ Use key 2 to confirm
If no password is required the in.touch will connect
automatically.
WiFi (in.touch only)
Once the in.touch module is connected to a WiFi
network, a green check mark will appear in the WiFi
menu, and the network name will appear in the
Settings menu.
