Y
Y
69
68
Output cable
Strain relief bracket
1/8" (3 mm) max
Replace the cover. Do not over tighten cover screws
(torque to 8 in. lb max (0.9 N.m)
The cable jacket must not exceed the strain relief bracket
more than 1/8" (3 mm).
Once all cables of high voltage accessories are routed
through the openings provided for this purpose on each
sides of the enclosure of the control system, you can
replace the strain relief brackets.
in.yt
in.ye
For 14-4
cable size
(
∅
0.410"
to 0.425")
For 14-3/18-3
cable size
(
∅
0.305"
to 0.375")
For 14-3/18-3
cable size
(
∅
0.305"
to 0.375")
For 14-3/18-3
cable size
(
∅
0.305"
to 0.375")
For 14-4/14-3
cable size
(
∅
0.365"
to 0.425")
For 14-4/14-3
cable size
(
∅
0.365"
to 0.425")
For 14-4/14-3
cable size
(
∅
0.365"
to 0.425")
For 14-4 only
cable size
(
∅
0.410"
to 0.425")
Completing the Installation
Output cable opening size.
Pin #3 (White)
Pin #3 (White)
Pin #2 (N/A)
Pin #2 (N/A)
Pin #4 (Green)
Pin #4 (Green)
Pin #1 (Black)
Pin #1 (Black)
WIRING
Amp Connector and Housing
A special PP-1 splitter can be ordered (Part #: 9920-401369) and used to split an output into 2 parallel outputs (i.e. a single
output could be used to drive two accessories like an ozonator and a UV generator, or a CP). Both accessories driven must be of
the same operating voltage (120 V or 240 V).
14
14
