8
8
29
28
5
5
Audio
The in.k800 can be used with the in.stream 2,
in.tune or in.stream audio system.
The Audio section in the Settings menu gives you
the option to disconnect or unpair your Bluetooth
enabled device when using the in.stream.
The in.stream 2 Settings menu gives you a
Bluetooth disconnect feature and an audio control
on Fader, Balance and Subwoofer.
For more information on audio functions, see
the in.tune, in.stream or in.stream 2 operation
section.
in.stream Functions
This menu is only available if the in.stream option
was selected during production.
Press the Mode key to access your in.stream.
If you are using a device with Bluetooth technology,
it must be connected for functions to work.
Please note that the Play/Pause and Change
Track functions apply to devices using Bluetooth
technology only, and will not work when Aux is
selected as the source.
Turning power on/off
Press the Power key to turn the in.tune on or off.
Selecting the source
Press the Bluetooth key to select a device using
Bluetooth wireless technology.
Press the Source key to use a device connected
to the auxiliary cable.
If no source is selected, the in.stream system will use
the last selected source.
Play/Pause audio
Press the Play/Pause button to start or pause the audio.
Adjusting the volume
Press the Volume Up or the Volume Down key to
increase or decrease the volume.
Changing tracks
Use the Last Track and Next Track keys to change tracks.
Disconnect or Unpair Bluetooth
These options can be found under the Audio section in
the Settings menu.
in.tune Functions
This menu is only available if the in.tune option was
selected during production.
Press the Mode key to access your in.tune.
Turning power on/off
Press the Power key to turn the in.tune on or off.
Selecting the source
Press the Source key to choose between CD, Aux
input and Radio.
If no source is selected, the in.tune will use the last
selected source.
Play/Pause audio
Press the Play/Pause key to start or pause the audio.
Adjusting the volume
Press the Volume Up or the Volume Down key to
increase or decrease the volume.
Changing tracks
Use the Last Track or Next Track keys to change
tracks for the CD or Aux input. When in Radio mode,
the Last Track and Next Track keys will move through
preset radio stations on the selected band. To change
bands or preset stations, see your in.tune manual.
in.stream 2 Functions
This menu is available only if the in.stream 2 was
detected at power up.
Press the Mode key to access your in.stream 2.
If you are using a device with Bluetooth technology,
it must be connected for functions to work.
Please note that the Play/Pause functions apply
only to Bluetooth and USB source. Change Track or
station functions works with all sources except Aux.
Turning power on/off
Press the Power key to turn the in.stream 2 on or off.
Selecting the source
Press the Source key to toggle between
available sources.
Play/Pause audio
Press the Play/Pause button to start or pause
the audio.
Adjusting the volume
Press the Volume Up or the Volume Down key
to increase or decrease the volume.
Changing tracks
Use the Last Track and Next Track keys to change
tracks. Note that on FM these functions can be use to
change stations.
Disconnect
This option can be found under the Audio section in
the Settings menu.
Fader, Balance and Subwoofer
Fader, Balance and Subwoofer settings can be edited
under the Audio section in the Settings menu if your
in.stream 2 supports it.
in.mix
in.mix functions
This menu is only present if an in.mix system is
detected.
Press on the Mode key to access your in.mix.
By default, the in.mix selects Zone 1 when you
access the menu. After the first use the menu will
automatically return to the last zone selected.
in.clear
in.clear-200
(linked version)
The in.k800 keypad can be used with the in.clear
sanitization system. The in.clear section allows you to
configure your maintenance settings and Boost level.
For more information on maintenance and Boost
settings, see the in.clear user manual.
Use the Up and Down keys to make your selection,
then key 2 to confirm.
Use the Up and Down keys to change the
maintenance or Boost value, and key 2 to confirm.
Note: If the maintenance value is modified by more
than 2, a warning message will appear with an option
to cancel or confirm the change.
Diagnostic Mode
Press on the Diagnostic key to start a BromiCharge
concentration level test. To exit diagnostic mode,
press on the Diagnostic key again. The system will
automatically exit after 15 minutes.
In diagnostic mode, the BromiCharge gauge indicates
the approximate level of BromiCharge in the spa
water. Do not add BromiCharge if the indicator is in
the green zone.
When BromiCharge is added, the indicator will move
slowly to the right. When water is added to the spa,
the indicator will move to the left. To obtain a good
level of BromiCharge, start the pumps and add the
specified amount of BromiCharge* and allow five
minutes for the indicator to adjust before adding
more.
For optimal performance, aim for the middle of the
green zone.
* For more information on adjusting your
BromiCharge, level see the in.clear user manual.
in.clear Functions
This menu is only available if an in.clear link is
detected.
Press on the Mode key to access your in.clear
module.
This menu allows you to activate or deactivate
your in.clear, to start or stop a Boost and to enter
diagnostic mode.
Turning the in.clear on/off
Press the power key to turn the in.clear on or off.
Control the Boost level
Press on the Boost activation/deactivation key to start
a Boost, and again to cancel.
To adjust the Boost level use the arrow keys.*
A message indicating that Boost mode is active is
displayed at the bottom of the main screen for the
duration of the boost.
* See the in.clear user manual for more details about
Boost levels.
Zone selection
The zone selection keys allow you to select a zone to
modify its colour.
∙ Press once to select the zone.
∙ Press a second time to deactivate the zone.
Changing colours
Once a zone is selected, use the arrow keys to
change the colours by moving up and down in the
colour wheel.
Synchronizing zones
The synchronization/desynchronization key allows you
to match the colour of the selected zone to the other
zones.
9919-101201-J
Rev. 12-2019
www.geckoalliance.com
© Groupe Gecko Alliance Inc., 2020
All trademarks or registered trademarks are the property of their respective owners.
Printed in Canada