Y
Y
75
74
in.k200 main keypad
LED display, 4 keys
in.k600 static main keypad
LCD display, 11 keys
in.k300 main keypad
LCD display, 4 keys
in.k500 main keypad
Colour LCD display, 7 keys
K-19 main keypad
LED display, 4 keys
K-35 main keypad
LED display, 6 keys
in.k450 main keypad
LCD display, 7 keys
K-8 main keypad
LCD display, 8 keys
K-4 main keypad
LCD display, 8 keys
in.k800 main keypad
Colour LCD display, 10 keys
in.k1000 main keypad
Colour LCD capacitive
touchscreen display
in.k1000+ main keypad
Colour LCD capacitive
touchscreen display
CONTROLLER POWER UP
Start Up of Your Control System
To perform the control system start up, refer to page 7: Start Up Guide Y Series.
COMPATIBLE KEYPADS
List of Compatible Keypads for the Y Series Control System
For more information on the compatible keypads for your control system refer to the corresponding Techbook at
www.geckodocs.com
TROUBLESHOOTING
Troubleshooting Information for Your Control System
For troubleshooting your control system, refer to the Y Series Troubleshooting Guide on page 78.
In.ye and in.yt North American Electrical Specifications
Input rating:
120/240 V nominal (+5/-10 %)
60 Hz, (2 lines required with neutral) 48 A max.
or (in.ye-3 only) :
120 V nominal only (+5/-10 %)
60 Hz, (single line with neutral) 16 A max.
Heat.wav rating:
Voltage :
120 V or 240 V, 60 Hz
Wattage:
5,5 kW at 240 V, 4 kW at 240 V or 1 kW at 120 V
Flow rate
Minimum of 18 GPM (68 LPM) is required
output
voltage
maximum
current
typical
device
ye-3*
1
ye-5
yt-7
yt-8
yt-12
Output 1
120 or 240 V
15 FLA/60 LRA (inrush)
Pump 2 high speed
•
•
•
•
Output 2
120 or 240 V
15 FLA/60 LRA (inrush)
Pump 1 high speed
•
•
•
•
•
Output 3
120 or 240 V
15 FLA/60 LRA (inrush)
Pump 2 low speed
•
•
•
•
Output 4
120 or 240 V
15 FLA/60 LRA (inrush)
Ozonator
•
•
•
•
•
Output 5
120 or 240 V
15 FLA/60 LRA (inrush)
Pump 1 low speed
•
•
•
•
•
Output 6
120 or 240 V
15 FLA/60 LRA (inrush)
Pump 3 low speed
•
•*
2
•
Output 7
120 or 240 V
15 FLA/60 LRA (inrush)
Circulation pump
•
•
Output 8
120 or 240 V
15 FLA/60 LRA (inrush)
Pump 3 high speed
•
•
Output 9
120 or 240 V
20 FLA/80 LRA (inrush)
Pump 4 high speed
•*
3
•
Output 10
120 or 240 V
15 FLA/60 LRA (inrush)
Pump 4 low speed
•*
4
•
Output 11
120 or 240 V
15 FLA/60 LRA (inrush)
Blower
•
Output 12
120 or 240 V
15 FLA/60 LRA (inrush)
Pump 5
•
Direct out 1
120 or 240 V
5 A
Audio/video
•
•
•
•
Direct out 2
120 or 240 V
5 A
Audio/video
•
•
•
important
:
The maximum current for output 2 on fuse F1 may not exceed 20 A.
The maximum current for outputs 4, 5 and Direct 1 on fuse F2 may not exceed 15 A.
The maximum current for outputs 1 and 3 on fuse F3 may not exceed 20 A.
The maximum current for outputs 6 to 8 and Direct 2 on fuse F21 may not exceed 15 A.
The maximum current for outputs 11 and 12 on fuse F22 may not exceed 15 A.
The maximum current for outputs 9 and 10 on fuse F23 may not exceed 20 A.
The total maximum current for the fuses F22 and F23 may not exceed 30 A.
1. This model can be converted to a dedicated 120 V model.
2. The typical accessory for the output 6 on a in.yt-8 is a pump 3 high speed.
3. It’s possible to configure the output 9 as a secondary heater on the in.yt-8.
4. The output 10 of the in.yt-8 is limited to 1A. This output is normally used with low current accessories.
*
*
*
*
SPECIFICATIONS
UL/CSA Standards
UL 1563 Sixth Ed. (2012)
UL File: E182156
CAN/CSA C22.2 No. 218.1-13 (2013)
14
14