5
5
31
30
6
6
Water Temperature
The temperature shown at the top of the screen gives
the actual water temperature.
Use the Up and Down buttons to set the desired
temperature. The set point will appear in blue at the
bottom. After three seconds without any change to
the set temperature value, the keypad will resume the
normal display of messages.
Description
Main Functions
QUICK REFERENCE CARD
Please consult your spa user manual for complete information on the features of your spa system.
in.k500
intuitive colour keypad
The in.k500 is built with all the great features you've come to love
in the in.k800, but in a smaller package. It is discreet, compact and
unobtrusively beautiful. Save space without losing out on function.
Key 1
Selection lights
Key 2
Settings
Light Key
Mode
Up
Down
*Functions for keys 1 and 2 will depend on
your system's low level configuration.
Start or Stop Accessories
To start or stop an accessory, press the associated
button. Icons will become animated when their
accessory is turned on, and inanimate when turned
off. Icons on the screen will reflect the speed or state
of the devices running on your spa.
When an accessory has more than two states, press
the button until it reaches the desired state.
Note
(version 14.00 and higher)
: A special buttons
and icons mapping may be used when the spa
configuration has four accessories* (3 pumps and
a blower or 4 pumps and no blower). In this case
only, buttons and icons are divided in two sets of
accessories. Button 1 starts or stops pump 1 and
pump 2. Button 2 starts or stops Pump 3 and Pump
4/blower. Corresponding icons will be animated when
one or more accessories are on.
* Only Pump 1 can have a dual speed.
Mode Key
Successive presses on the Mode key will give
access to control different optional accessories of
your spa, such as Audio. Note that if an accessory
is not present in your spa configuration, its menu
will not appear. Refer to the following section to get
details about the possible accessories and their
functionalities. The screen will revert back to the spa
mode if no key is pressed for 60 seconds.
If you don't have any accessories, Mode key can be
used to change your display orientation
Settings Key
One press gives you access to a menu to manage the
settings of your spa. Refer to the Settings section for
details about the settings menu.
Main Screen
The main screen gives you access to your accessories
and water temperature. At the bottom of the screen
you will see any error or maintenance messages that
are present.
Power
Press any button to turn the keypad on. After 30
minutes without activity it will shut off.
Smart Heat
This mode uses the heat pump as the main heating
source. The heating element is turned on only if there
is a large temperature difference between the water
and the set point. The heat pump is not used to cool
the water in this mode.
Eco Auto
This mode borrows functionality from both Eco Heat
and Cool modes and has the ability to select the
proper Heat or Cool mode automatically according to
the water temperature. The heating element is never
activated in this mode.
Smart Auto
This mode borrows functionality from both Smart
Heat and Cool modes and has the ability to select the
proper Heat or Cool mode automatically according
to the water temperature. The heating element
is activated only if there is a large temperature
difference between the water and the set point.
Cool
This mode uses the heat pump in cooling mode only.
The heat pump is not used as a heating source and
the heating element is never activated.
Electric
This mode keeps the heat pump off and uses only
the heating element to regulate water temperature.
Modifying Schedules
Use the arrow keys to scroll through the Water
Care selections. To see and/or modify a Water Care
category, use the light button to the right (key 1) to
open the selected Water Care menu.
Use the arrow keys to choose a schedule to modify
(choice of economy and filtration schedules). Use the
Light key to move between parameters.
You have several possibilities for the schedule
(Mon-Fri, weekend, every day or single days). The
schedules will be repeated every week. The time and
duration are set in 30 minute increments. Once you
have set the schedule, use Key 1 to go back. Ensure
that you have selected the desired Water Care option
in the main Water Care menu.
If your spa uses a circulation pump configured to run
24 hours, the screen will show you the purge setting
instead of filtration. The purges are pre-programmed
for a fixed number of minutes, therefore the duration
will be set to N/A on the screen, and only the start
time can be modified.
Settings
From the home page you can access the Settings.
Use the arrow keys to move up and down in the list.
To select an option, press the Light key. At any point
you can press the Settings button to return to the list:
∙ Water Care
∙ Heat Pump (if installed)
∙ Audio (if installed)
∙ in.clear-200 linked version (version 13.00 and
higher
∙ Standby (version 6.00 only)
∙ Maintenance (version 7.00 and higher)
∙ Date & time
∙ Keypad
∙ WiFi (Version 7.00 and higher. Only available on
in.touch with software 11.00 and higher.)
∙ Config *
∙ Restore *
∙ About
*Reserved for qualified electricians / installers
Water Care
The Water Care section will help you set up your
ideal filtration and heating settings. Choose a mode
depending on your needs.
Use the Light key to choose your setting. A check
mark will appear on the selected icon to confirm.
In Economy mode, the set point will be reduced
by 20°F (default pack value) which means that
the heating system will not be engaged unless
the temperature falls to 20°F below the spa's set
temperature.
Heat Pump
This menu allows you to change the regulation mode
of your heat pump. You can choose from Eco Heat,
Smart Heat, Eco Auto, Smart Auto, Cool and Electric.
A green check mark indicates the currently selected
regulation mode. To change the setting, simply
navigate the menu using the arrow key and press the
Light Key to choose the desired regulation mode.
Heat Pump Modes
Eco Heat
In this mode, the heat pump is used as the unique
source of heating. The heating element is kept off and
the heat pump is not used to cool the water should its
temperature rise above the current set point.
Water Care Modes
Away:
In this mode the spa will always be in
economy. The set point will be reduced
by 20°F*.
Standard:
The spa will never be in economy mode
and will be filtering according to the
pack's low level configuration.
Energy Savings:
The spa will be in economy mode during
the peak hours of the day and resume
normal mode on the weekend.*
Super Energy:
The spa will always in economy mode
during peak hours, every day of the
week.*
Weekender:
The spa will be in economy mode from
Monday to Friday, and will run normally
on the weekend.*
*Filtration will be reduced when the economy mode
is active.
