manualshive.com logo in svg

OTARI Status 18R, Operation And Maintenance Manual, Page: 93 / 250

Share
Download
OTARI Status 18R Operation And Maintenance Manual Download Page 93

7.

Press 

Clear 

in the Track Assign area of the Master Section. Assign to tracks

7 through 12 by pressing 

7-8

, 

9-10

and 

11-12

.

All other Track Assign LEDs should be Off. We will call this Setup 1.

8.

Press 

Copy To Module

, then press 

All

.

9.

With all modules selected, press 

Swap Last State 

repeatedly.

All Track Assigns toggle between 7 through 12 (Setup 1) and 1 through 6 (Setup 2).

If additional modules are selected while 

Swap Last State 

is lit, the previous states of the

originally Selected modules will be “out of sync” with those of the newly Selected
modules. The 

Swap Last State 

LED always displays the state of the original selections.

The 

Swap Last State 

LED is reset and turned off when all modules are deselected.

Section 4 - Operation

August 1999

4 - 11

STATUS 18R 

Operation and Maintenance Manual

Summary of Contents for Status 18R



























































































































































































































































Reviews:

No comments