manualshive.com logo in svg

OTARI Status 18R, Operation And Maintenance Manual, Page: 150 / 250

Share
Download
OTARI Status 18R Operation And Maintenance Manual Download Page 150

5.6 Eagle Quick Tour

5.6.1 Automation Overview

Eagle Automation oversees all automated functions of the Status console. The
automation is operated by dedicated switches and faders on the console surface and by
virtual buttons and faders on the automation PC’s video display. Most of the console’s
dedicated controls are duplicated on Eagle’s windows allowing local (console) or central
(trackball or mouse) operation, whichever is more convenient for a given task.

Eagle handles two types of automation on the Status console:

• Dynamic Automation: 

Automation that records individual fader and/or switch moves

on a frame-by-frame basis. Dynamic automation is controlled using the path 

Auto

buttons, the Master Section 

Write 

and 

Update 

buttons, and the Automation functions

found in the Automation menu on the Status LCD display.

• Snapshot Automation: 

Complete console Setups that are recalled manually or from

an event list linked to time code. Snapshots can be saved and loaded manually using
the Snapshot options found in the Recall menu on the Status LCD display. In Eagle
Automation, the term Actions is used to describe different types of Snapshots.

Snapshot automation is most useful for making global changes to console switch and
fader settings, while dynamic automation is better for storing the continuously changing
moves of individual faders and switches. Snapshot automation complements Dynamic
automation by providing the basic levels from which dynamic moves can be created.

Eagle’s Console window shows various views of the console’s faders and switches,
allowing their states to be viewed centrally. In addition, individual faders and switches
can be selected and affected as a group, to change levels and switch states.

The Time Line window displays the mix in a linear fashion, showing events that take
place during the mix. Dragging the Current Time pointer back and forth on the Time Line
causes the Console window to display the switch and fader states for that point in time.

Stored Snapshots can be linked to time code events in the Events window and
automatically recalled when the current time code matches the event’s time code.

Numerous other windows provide addition functions for operating Eagle and editing mix
data. To get a sense of how to use Eagle during a mix session, proceed to the Quick
Tour, otherwise browse through the help system for more information on Eagle’s
windows and controls.

Section 5 - Eagle Automation

STATUS 18R

Operation and Maintenance Manual

5 - 28

August 1999

Summary of Contents for Status 18R



























































































































































































































































Reviews:

No comments