manualshive.com logo in svg

OTARI Status 18R, Operation And Maintenance Manual, Page: 139 / 250

Share
Download
OTARI Status 18R Operation And Maintenance Manual Download Page 139

5.5.9 Status Window

The Status window displays System and Mix Record status messages:

• READY (Red): 

Record mode is active, time code is not running.

• READY (Yellow): 

Safe mode is active, time code is not running.

• READY (Green): 

Play mode is Active, time code is not running.

• PLAY (Green): 

Play mode is active, time code is running.

• RECORD (Red): 

Record mode is Active, time code is running.

• AUDITION (Yellow): 

Safe mode is active, time code is running.

• WORKING (Red): 

Eagle is processing Mix Data

• PRE ROLL (Green): 

Eagle is syncing data to incoming timecode.

5.5.10 Record Controls Window

The Record Controls window is used to punch automation in and out of record and to
set the Safe mode.

• REC (Record):

When Rec is active, faders and switches I that are in Write or Update

are written to data. The Rec button allows fader and switch moves to be punched in at
a specific time.

• PLAY:

Pressing 

PLAY 

deactivates Record.

• SAFE:

When in Safe mode, the 

REC 

and 

PLAY 

buttons operate normally, but nothing

is written to data. This is used to prevent Rec from accidentally being pressed. Clicking

SAFE 

toggles Safe mode on and off.

5.5.11 Tool Bar

The Tool Bar contains buttons that take you directly to frequently used windows and
functions. If a button is grayed out the function is not available.

Clicking the 

Stopwatch 

tool displays the Events window.

Clicking the 

Fader knobs 

tool displays the Mix Edit—Fader window.

Clicking the 

Switch buttons 

tool displays the Mix Edit—Switch window.

Clicking the 

Data Scissors 

tool displays the Mix Edit—Merge window.

Clicking the 

Mix Gears 

displays the Mix Processing window.

Clicking the 

Track Sheet 

button displays the Track Sheet window.

5.5.12 Info Bar

The Info Bar is used to display system statistics and help information.

STATUS 18R

Operation and Maintenance Manual

Section 5 - Eagle Automation

August 1999

5 - 17

Summary of Contents for Status 18R



























































































































































































































































Reviews:

No comments