OTARI Status 18R Operation And Maintenance Manual Download Page 249

Page: 249 / 250

■

Setting All Modules to a Preset

The

Set All

button takes the selected Preset and applies its settings to all Dynamics

modules in the console. You may select which device will be loaded from the Preset by
toggling the

Gate

C/L

button until its LED is On.

To set all dynamics modules to a Preset:

Press the

Preset/Key/Link

selection button and turn the left

Preset

rotary

encoder knob until the desired Preset number is displayed.

Press

Gate

and/or

C/L

until the LEDs are lit on the item(s) that you want to

copy to all modules.

Hold

Set All

and press

Load

When

Set All

is held, the display indicates that the

Load

button must be pressed

to set all modules.

B.5.7 Saving and Loading Dynamics Preset and Image Files to

Floppy

There are two types of files used for storing Dynamics settings:

Preset File

- A file that stores a bank of eight Dynamics Presets.

Image File

- A file that stores the console’s dynamics setup.

One Preset and one Image file can be saved to the console floppy disk using the LCD
Menu System.

■

Saving Preset and Image Files

Press

Misc

on the LCD Menu System. Press

FILES

Press

DYN

to display the Dynamics File Menu.

Press

SAVE

under

PRESETS

to save the current Presets to the console

floppy. Press

SAVE

under

IMAGE

to save the current Dynamics setup to the

console floppy.

■

Loading Preset and Image Files

Press

Misc

on the LCD Menu System. Press

FILES

Press

DYN

to display the Dynamics File Menu.

Press

LOAD

under

PRESETS

to load the current Presets from the console

floppy. Press

LOAD

under

IMAGE

to load the current Dynamics setup from

the console floppy.

August 1999

B - 15

STATUS 18R

Operation and Maintenance Manual

Appendix B Dynamics Option

Set

All

Load

Save

Gate

C/L

Ratio

Output

Auto Gain

Key

Preset

Link

Select

C/L

Preset/Key/Link Button

Preset Load Button

Set All Button

Set All Buttons

MISC

→

FILES Menu

Meter

Solo

Group

Recall

Automation

Misc

NOV --- FILE ---
UPS SNAPS PRSTS DYN

MISC

→

FILES

→

DYN Menu

Meter

Solo

Group

Recall

Automation

Misc

--PRESETS--DYN--IMAGE--

LOAD SAVE LOAD SAVE

Gate and C/L Select

Buttons

Summary of Contents for Status 18R


























































































































































































































































Search results

Summary of Contents for Status 18R

Reviews:

OTARI Status 18R, Operation And Maintenance Manual, Page: 249 / 250

Search results

Summary of Contents for Status 18R

Reviews: