OTARI Status 18R Operation And Maintenance Manual Download Page 172 | Manualshive

Page: 172 / 250

OTARI Status 18R Operation And Maintenance Manual Download Page 172

5.8.9 How To Store Snapshots As Events

A Snapshot Event is stored each time a Snapshot is recalled while timecode is running.
In order to create Snapshot Events you must first store the snapshots that will be
recalled.

To Store Snapshots:

1.

Set the console faders and switches as desired for the snapshot.

2.

Press

Recall

below the LCD Menu System to display the Snapshot load/save

screen.

3.

Press

SNAPSHOT SAVE

.

The Snapshot Save menu appears.

4.

Press the Up or Down Arrow keys to scroll to the snapshot number desired.
Press

SAVE

to store the snapshot.

Repeat this step to save all of the snapshots that you want to automate.

To Create Snapshot Events:

1.

Press

Recall

below the LCD Menu System to display the Snapshot load/save

screen.

2.

Press

SNAPSHOT LOAD

.

The Snapshot Load menu appears.

3.

Press the Up or Down Arrow keys to scroll to the snapshot number desired.
Press

LOAD

while time code is running to recall the snapshot and enter it into

the Event list.

Repeat this step to recall all of the snapshots that you want to automate.

4.

Display the Events window by clicking the Events button on the Eagle
Toolbar.

The snapshot numbers are displayed next to their associated timecode. These
events can now be labeled, moved and copied like any other event.

Section 5 - Eagle Automation

STATUS 18R

Operation and Maintenance Manual

5 - 50

August 1999

«
...
170
171
172
173
174
...
»

Summary of Contents for Status 18R



























































































































































































































































Reviews:

No comments