manualshive.com logo in svg

OTARI Status 18R, Operation And Maintenance Manual, Page: 56 / 250

Share
Download
OTARI Status 18R Operation And Maintenance Manual Download Page 56

3.3 Digital Master Module

Following is a description of the Digital Master Module controls and indicators that are
not a part of the Master Section. These include:
• The LCD Display and Associated Buttons
• F1 through F3
• The Solo Modes Section
• The Talkback Section
• The Control Room Switches
• The Meter Display Switches
• Solo Clear

3.3.1 LCD Display

The LCD display and its associated keys provide access to most of the console’s master

functions. The main components include:

• The 48 character backlit Liquid Crystal Display (LCD)
• The 8 selection buttons with LEDs surrounding the display
• The 6 function buttons with LEDs - Meter, Solo, Group, Recall, Automation, and Misc

The panel graphics delineate the display into 8 sections, each with an associated
selection button. When a function key is pressed, the LCD displays options for some or
all of the selection keys.

The selection keys have different modes of operation depending on the option being
displayed. A selection button may operate as any of the following:

• Toggle: 

Toggles the displayed option On or Off. The button’s LED indicates the On

state of the option. (ie. Solo Defeat On/Off)

• Scroll: 

The button is used to increment or decrement a number or move through a list.

(ie. Adjust snapshot ramp time)

• Execute: 

The button executes the function displayed. (ie. Load a snapshot)

• Menu Option: 

Pressing the button goes to a second menu or returns to the previous

menu. (ie. Done).

Operation of the LCD Menu System is described in 

Section 4

, 

Operation

.

3.3.2 Function Keys F1–F3

There are three buttons labeled 

F1 

through 

F3 

next to the 

Many 

button on the Digital

Master Module. The 

F1 

and 

F2 

buttons are used to start and stop the internal time code

generator.

STATUS 18R

Operation and Maintenance Manual

Section 3 - Controls and Indicators

August 1999

3 - 18

LCD Display

Meter

Solo

Group

Recall

Automation

Misc

F1

F2

F3

Function Keys F1 - F3

Summary of Contents for Status 18R



























































































































































































































































Reviews:

No comments