manualshive.com logo in svg

OTARI Status 18R, Operation And Maintenance Manual, Page: 158 / 250

Share
Download
OTARI Status 18R Operation And Maintenance Manual Download Page 158

5.6.12 Punching In Data

The RECORD and PLAY buttons can be used to punch in faders and switches that are
set to Write. You may switch between Record and Play as often as you like while the mix
is running using the REC and PLAY buttons on the LCD Menu or the Eagle display.

NOTE: 

The Auto Record (AUTREC) function must be Off in order to punch in and out of

Record.

5.6.13 Archiving (Saving) the Mix

The current mix resides in the automation PC’s RAM (Random Access Memory) for fast
access and post-pass processing. To write the current mix to disk and keep it from
being updated, use Archive Mix (ARCH).

A mix can be archived in either of the following ways:
• From the LCD Menu System, press 

Automation

, 

OPTS

, then 

ARCH

.

• On the Eagle Screen, Click the 

ARCH 

button.

• From the Eagle Files menu select Save or press 

CTRL

-

S

on the QWERTY keyboard

Archiving increments the Write Mix number so that the archived mix can no longer be
written to. Future passes will be written to the next highest mix number. The archived
mix can be recalled at any time as the basis for a new mix.

Read, Write, and Original mix numbers are displayed in the Mix Processing window.

Eagle can archive passes automatically if desired. Setting the Auto-Archive number
archives the mix after the specified amount of passes.

To set the Auto Archive number:

1.

From the Eagle 

Edit 

menu, select

Automation Preferences

.

2.

Click the 

Mix Options 

tab to display and set the 

Auto Archive 

number.

Meter

Solo

Group

Recall

Automation

Misc

One

Many

F1

None Selected

F2

F3

SoftKey

Toggle

Module

Undo

Set

Transparent

Swap Last

State

Auto

Select

Shift

SWITCH UNDO  MKCUE OPTS
ALLRD RECORD PLAY  SAFE

Shift
Button

Function
Select
Buttons

Automation

Menu

Button

Section 5 - Eagle Automation

STATUS 18R

Operation and Maintenance Manual

5 - 36

August 1999

Summary of Contents for Status 18R



























































































































































































































































Reviews:

No comments