■
All
Pressing
All
selects all Input Modules in the console.
All
selects all Modules even if
Modules are already selected. If
Many
is active, pressing
All
alternately selects and
deselects all modules.
All Modules can be deselected by pressing
Copy To Master
.
■
A, B, C
The
A
,
B
and
C
buttons store Module Select Groups for recall. The
A
,
B
,
C
and
All
buttons have shifted versions, allowing up to 7 Select Groups to be saved. Each select
button is identical in function.
Select Groups are useful for storing commonly used module selections for recall with
one button.
To store a Select Group, select the modules desired, hold
Many
, then press
A
,
B
, or
C
.
To store a shifted select group, select the modules desired, hold
Many
, press
Shift
and
release, then press
A
,
B
,
C
, or
All
.
■
Last
Pressing
Last
recalls the last set of module selections. If a module selection has been
cancelled by a time out, pressing
Last
will restore the cancelled selection.
Holding
Shift
and pressing
Last
inverts the
current
module selection. All modules that
are selected will be deselected and vice-versa.
■
Auto Select
Pressing
Auto Select
puts the console in Auto Select mode. When any computer
controlled button is pressed on an Input Module, that module is attached to the Master
Section for editing.
Auto Select only works in Copy To Master - One mode.
■
None Selected Indicator
The
None Selected
indicator lights when there are no modules selected. This can occur
when
Copy To Master
or
Copy To Module
is pressed or when
Set Transparent
is
pressed twice.
This is an LED indicator only. There is no button associated with this function.
Section 3 - Controls and Indicators
August 1999
3 - 15
STATUS 18R
Operation and Maintenance Manual