OTARI Status 18R Operation And Maintenance Manual Download Page 88 | Manualshive

Page: 88 / 250

OTARI Status 18R Operation And Maintenance Manual Download Page 88

■

Set

Transparent

Set Transparent

allows the Master Section to be configured independently before

copying it to modules, Presets or Soft Keys.

When

Set Transparent

is pressed once, all modules are deselected. Pressing any

button in the Master Section toggles the function in and out of transparent mode.
Transparent functions will not be copied to Input modules.

When

Set Transparent

is pressed a second time within three seconds of the first press,

all switches in the Master Section become transparent. While the Master Section is in
this condition, no switch states can be copied to a module. Pressing any button in the
Master Section toggles the function in and out of transparent mode. Individual functions
can now be recalled and copied without affecting the rest of the switches on a module.

4.4.6 Selection Buttons

The Selection buttons are used in conjunction with the Edit buttons to select modules for
editing. The following is a brief explanation of each of the Selection buttons; examples of
their use are given later in this section.

The Selection buttons include:
• Input Module Select Buttons
• Group A
• Group B
• Group C
• All
• One
• Many
• Last
• None Selected LED Indicator

■

One

Pressing

One

causes module selection to operate in an interlocked mode. When

One

is

active, pressing a module

Select

button selects the module and deselects all previously

selected modules. Holding any Select button while pressing other Select buttons allows
multiple modules to be selected while in One mode. Select button operation is the same
as Many mode.

■

Many

Pressing

Many

causes module selection to operate in an additive mode. When

Many

is

active, a number of Input modules may be selected simultaneously. Pressing an Input
module’s

Select

button selects or deselects the module from currently selected

modules.

■

All

Pressing

All

selects all Input modules in the console.

All

selects all Input modules even if

there are modules already selected. If

Many

is active, pressing

All

alternately selects and

deselects all modules.

■

Group A, Group B, Group C

The

Group A

,

B

and

C

buttons store user-defined Select Groups for recall. They are

identical in function.
Three additional Select Groups are available by holding the

Shift

key while pressing

Group A

,

B

or

C

.

Select Groups are described in greater detail later in this section.

■

Last

Pressing

Last

recalls the last set of module selections. If a module selection has been

cleared or cancelled by a time out, pressing

Last

will reselect the last modules selected.

4 - 6

STATUS 18R

Operation and Maintenance Manual

Section 4 - Operation

August 1999

One

Select Groups

Presets

A

B

C

All

Last

Many

F1

None Selected

F2

F3

SoftKey

Toggle

Module

Undo

Set

Transparent

Swap Last

State

Auto

Select

Shift

Rec

Mix

Over

dub

Broad

cast

Copy To

Master

Copy To

Module

Edit and Selection Buttons

Select

14

Module Select Button

«
...
86
87
88
89
90
...
»

Summary of Contents for Status 18R



























































































































































































































































Reviews:

No comments